Operator`s manual

Premier Norfolk & Western J Steam Locomotive
20
1. Once the boiler has been removed, remove the inspection cover (See figure 18).
Inspect the wick; if it is darkly discolored and hard, it should be replaced.
Replacement parts and wick replacement instructions are available directly from the
M.T.H. Parts Department phone: [phone]; e-mail: [e-mail]:
7020 Columbia Gateway Drive, Columbia MD 21046-1532
Inspect Cover
Screws
Figure 18
If you experience poor or no smoke output when the smoke unit is on and has fluid,
check the wick to see if it has become hard, blackened, and nonabsorbent around the
heating element. To remove the smoke unit you will first have to remove the boiler
shell (by removing the body mounting screws shown in Fig. 11 on pg. 14).