Manual

ManualsBrandsLuxul ManualsRoutersXVW-P30

14203 Minuteman Drive, Ste 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

Other trademarks and registered trademarks are the property of their respective owners

LUX-QIG-XVW-P30-v2 1113140428

Simply Connected

Use the XVW-P30 to:



Extend the Coverage Area of an

Existing Wi-Fi Network



Create a bridge to connect

Ethernet devices to your network



Deliver Reliable Wi-Fi Performance

at Speeds up to 300Mbps



Simplify Wi-Fi Expansion while

Minimizing Setup Time and Costs

Quick Install Guide

XVW-P30/XVW-P30-E

Wireless Range Extender/Bridge

The following safety precautions should be observed:



Do not hold any component containing the radio such that the antenna is

very close or touching any exposed parts of the body, especially the face or

eyes, while transmitting.

FCC Statement—Wireless FCC 2.4GHz 802.11bgn

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.



Consult the dealer or an experienced radio/TV technician

for help.

FCC Caution: Any changes or modiﬁ cations not expressly approved by the

party responsible for compliance could void the user’s authority to operate

this equipment.

This transmitter must not be co-located or operating in conjunction with any

other antenna or transmitter.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated

with minimum distance 20cm between the radiator & your body.

NOTE: (1)The manufacturer is not responsible for any

radio or TV interference caused by unauthorized

modiﬁ cations to this equipment.(2) To avoid

unnecessary radiation interference, it is

recommended to use a shielded RJ45 cable

Industry Canada (RSS-Gen Issue 2)

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2)this device must accept any interference, including

interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux

appareilsradio exempts de licence. L’exploitation est autorisée aux deux condi-

tions suivantes : (1)l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur

de l’appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d’en compromettre le fonctionnement.

The device meets the exemption from the routine evaluation limits in section

2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain

Canadian information on RF exposure and compliance.

Le dispositif rencontre l’exemption des limites courantes d’évaluation dans la

section 2.5 de RSS 102 et la conformité à l’exposition de RSS-102 rf, utilisateurs

peut obtenir l’information canadienne sur l’exposition et la conformité de rf.

This transmitter must not be co-located or operating in conjunction with

any other antenna or transmitter. This equipment should be installed and

operated with a minimum distance of 20 centimeters between the radiator

and your body.

Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps

qu’aucune autre antenne ou émetteur. Cet équipement devrait être installé et

actionné avec une distance minimum de 20 centimètres entre le radiateur et

votre corps.

CAN ICES-3 (B) /NMB-3 (B)

Industry Canada ICES-003 Compliance Label:

CAN ICES-3 (*) /NMB-3 (*)

CE Declaration of Conformity:

Hereby, Luxul, 14203 Minuteman Drive, Suite 201, Draper, Utah,

84020, declares that this Luxul XVW-P30-E is in compliance

with the essential requirements and other relevant provisions

of Directive 1999/5/EC.

For a copy of this report send a self addressed stamped

envelope to: Luxul CE, 14203 Minuteman Drive, Suite 201,

Draper, Utah, 84020.

9 10

WARNINGS AND SAFETY INFORMATION



Verify that the electrical circuits have appropriate grounding and

overload protection.



Verify there is adequate ventilation around the device, and that ambient

temperatures meet equipment operation speciﬁ cations.



The XVW-P30 is designed for indoor use only. DO NOT place this outdoors.



DO NOT install in or near hot or humid places, such as a kitchen or

bathroom. Take care to minimize exposure to excessive heat or moisture.



Small parts and plastic bags used for packaging may be harmful to small

children. KEEP All ACCESSORIES OUT OF THE REACH OF CHILDREN!



The XVW-P30 may become hot when in use for extended

time periods. This is normal and is not a malfunction. DO NOT install where

it will be exposed to paper, cloth or other ﬂ ammable materials.

REGULATORY COMPLIANCE

The device complies with internationally recognized standards covering human

exposure to electromagnetic ﬁ elds from radio devices. This equipment also

complies with FCC radiation exposure set forth for an uncontrolled environ-

ment. In order to avoid the possibility of exceeding the FCC radio frequency

exposure limits, human proximity to the antenna shall not be less than 20 cm (8

inches) during normal operation.

Unauthorized antennas, modiﬁ cations, or attachments could cause damage and

may violate regulatory approvals. Any

changes or modiﬁ cations not expressly approved by the party responsible for

compliance could void the authority to operate the equipment.

Equipment version marketed in the U.S. is restricted to usage of channels 1-11 only.

Health and Safety Recommendations

Warnings for the use of Wireless Devices: Please observe all warning notices

with regard to the usage of wireless devices

Potentially Hazardous Atmospheres: You are reminded of the need to

observe restrictions on the use of radio devices in fuel depots, chemical

plants etc. and areas where the air contains chemicals or particles (such

as grain, dust, or metal powders).

Safety in Hospitals: Wireless devices transmit radio frequency energy

and may affect medical electrical equipment. When installed adjacent to

other equipment, it is advised to verify that the adjacent equipment is not

adversely affected.

RF Exposure Guidelines

Safety Information: The device complies with internationally recognized stan-

dards covering human exposure to electromagnetic ﬁ elds from radio devices.

Warning: Exposure to Radio Frequency (RF) Radiation:

The radiated output of this device is below the FCC radio frequency exposure

limits. Nevertheless, the device should be used in such a manner that the

potential for human contact during normal operation is minimized.



The end user must avoid any extended human RF exposure directly in front

of the device, up to a distance of 20cm, when unit is on.



When servicing the equipment and selecting a location for the antennas, it

is important to note that a minimum distance of 20cm is required between

personnel and the device or antenna to comply with the radio frequency

exposure limit.



The antenna used for this transmitter must be installed to provide a separa-

tion distance of at least 20cm from all persons and must not be co-located

or operating in conjunction with any other antenna or transmitter.

Summary of content (2 pages)

PAGE 1
WARNINGS AND SAFETY INFORMATION Health and Safety Recommendations The following safety precautions should be observed: Radiation Exposure Statement  Verify that the electrical circuits have appropriate grounding and Warnings for the use of Wireless Devices: Please observe all warning notices with regard to the usage of wireless devices  Do not hold any component containing the radio such that the antenna is This equipment complies with FCC radiation exposure limits set forth for an uncontrolled env
PAGE 2
Quick Install Guide CONTACT LUXUL Model Number: XVW-P30/XVW-P30-E Wireless Range Extender/Bridge FCC ID: W59XVWP30 IC: 8584A-XVWP30 © 2014 Luxul. All Rights Reserved. Sales Technical Support P: 801-822-5450 E: sales@luxul.com P: 801-822-5450 E: support@luxul.com No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this manual is subject to change without notice.