Manual

User Guide
30
© Copyright 2014 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
5.11 IGMP Snooping
IGMP Snooping is used to implement dynamic registration of L2 multicast on
the switch. To accommodate L2 multicast with IGMP Snooping, IGMP must be
activated on the client device and router as the XMS-1024 only snoops the IGMP
messages transmitted by the client device and router to dynamically maintain
the L2 multicast group. Multicast registration on this switch does not affect the
settings of other switches in the environment. The switch transmits an IGMP query
message and receives the IGMP response from the client device. Based on the
receiving port, VLAN ID, and multicast of the IGMP packets, the XMS-1024 cre-
ates and maintains a multicast group. After creating a group, it forwards the IGMP
packets to other switches and routers in the network. Only the ports included in a
multicast group can receive the multicast data stream. This reduces network traffi c
and saves network bandwidth.
5.11.1 Snooping Confi guration
5.11.2 Snooping Status
5.11.1 Snooping Confi guration
IGMP Confi guration:
IGMP: Enables or disables L2 multicast. By default, this option is disabled
Router Ports: Selects the IGMP ports for multicast snooping
IGMP Confi guration List:
IGMP Snooping Enabled: Enables or disables the L2 multicast snooping
function
IGMP Query Enabled: Enables or disables the IGMP query function. Once this
function is enabled, the multicast snooping status can be viewed