Full Product Manual

ManualsBrandsluxier ManualsKitchenSingle-Handle Pull-Down Sprayer Kitchen Faucet with 2-Function Sprayhead in Oil Rubbed Bronze

KTS22 Rev.1 07/2018

Luxier USA

Model Number:

KTS22-TB (Brushed Nickel)

KTS22-TC (Chrome)

KTS22-TO (Oil Rubbed Bronze)

KTS22-TM (Matte Black)

Features:

- Brass and Zinc Alloy Construction

- Single Hole Installation

- Drip Free Ceramic Cartridge

- Maximum ow rate 1.8 gpm at 60 psi

- Pull Down 2 Stage Sprayer Head

- Complies with:

NSF 61-9

ASME A112.18.1

CSA B125.1

IAPMO / UPC / cUPC

CA AB-1953

ADA

Single Handle Kitchen Faucet with Pull Down Sprayer

Max. Deck Thickness 2”

21 1/16”

3 1/4”

1 1/2”

Mounting Hole

3/8” OD Compression Fittings

8 15/16”

6 1/2”

* All Measurements are Approximate *

Summary of content (4 pages)

PAGE 1
Single Handle Kitchen Faucet with Pull Down Sprayer Model Number: KTS22-TB (Brushed Nickel) KTS22-TC (Chrome) KTS22-TO (Oil Rubbed Bronze) KTS22-TM (Matte Black) Features: - Brass and Zinc Alloy Construction Single Hole Installation Drip Free Ceramic Cartridge Maximum flow rate 1.8 gpm at 60 psi Pull Down 2 Stage Sprayer Head Complies with: NSF 61-9 ASME A112.18.1 CSA B125.1 IAPMO / UPC / cUPC CA AB-1953 ADA 21 1/16” 8 15/16” 3 1/4” 6 1/2” Max.
PAGE 2
Thank you for purchasing Luxier products. Please read the information below and keep this installation guide for future reference. If you require assistance, please contact our customer service department at 1-877-711-8828, Monday - Friday 9AM - 5PM Paciﬁc Time or by email at support@luxierusa.com. Limited Lifetime Warranty (For USA Only) The manufacturer warrants this product to be leak and drip free during daily normal household use for as long as it is owned by the original purchaser of this product.
PAGE 3
Important Points • This installation guide is subject to change without notice, please contact us to request the most updated version of this installation guide. • This is a general installation guideline, actual installation may vary. Consult a professional if necessary. • Read and understand this instructions completely before installation. • Please follow all local building and plumbing codes. • Product drawings in this installation guide is for illustration purpose only.
PAGE 4
Installation B A A. Shut off water supply at the valves. Remove old faucet and clean the mounting surface for installation of new faucet. C B. Insert the hoses and shank through the hole. The faucet hole on the mounting surface should be 1 1/2” in diameter. D2 D1 D1. Apply Teflon (TPFE) tape on the shut off valves. Thread the tape in counter-clockwise direction. C. Slide the Mounting Base and the rubber washer onto the faucet underneath the counter top.