Specification

ManualsBrandsLuxier ManualsKitchenSingle-Handle Pull-Down Sprayer Kitchen Faucet with 2-Function Spray Head in Brushed Nickel

KTS20 Rev.1 07/2018

Luxier USA

Model Number:

KTS20-TB (Brushed Nickel)

KTS20-TC (Chrome)

KTS20-TO (Oil Rubbed Bronze)

Features:

- Brass and Zinc Alloy Construction

- Single Hole Installation

- Drip Free Ceramic Cartridge

- Maximum ow rate 1.8 gpm at 60 psi

- 2 Stage Sprayer Head with

quick connect pull down hose

- 1/2”-14 NPSM male copper inlet

connection

- Complies with:

NSF 61-9

ASME A112.18.1

CSA B125.1

IAPMO / UPC / cUPC

CA AB-1953

ADA

Single Handle Kitchen Faucet with Pull Down Sprayer

NOTE: This faucet does not include water supply hoses. A pair of water supply hoses with 1/2” FIP

ttings are required for installation

Max. Deck Thickness 1 3/4”

16 5/16”

3 3/8”

1 1/2”

Mounting Hole

1/2” - 14 NPSM male connector

8 9/16”

11 3/8”

7 1/8”

2 5/16”

* All Measurements are Approximate *

Summary of content (4 pages)

PAGE 1
Single Handle Kitchen Faucet with Pull Down Sprayer Model Number: KTS20-TB (Brushed Nickel) KTS20-TC (Chrome) KTS20-TO (Oil Rubbed Bronze) Features: - Brass and Zinc Alloy Construction Single Hole Installation Drip Free Ceramic Cartridge Maximum flow rate 1.8 gpm at 60 psi 2 Stage Sprayer Head with quick connect pull down hose - 1/2”-14 NPSM male copper inlet connection - Complies with: NSF 61-9 ASME A112.18.1 CSA B125.
PAGE 2
Thank you for purchasing Luxier products. Please read the information below and keep this installation guide for future reference. If you require assistance, please contact our customer service department at 1-877-711-8828, Monday - Friday 9AM - 5PM Pacific Time or by email at support@luxierusa.com. Limited Lifetime Warranty (For USA Only) The manufacturer warrants this product to be leak and drip free during daily normal household use for as long as it is owned by the original purchaser of this product.
PAGE 3
Important Points • This installation guide is subject to change without notice, please contact us to request the most updated version of this installation guide. • This is a general installation guideline, actual installation may vary. Consult a professional if necessary. • Read and understand this instructions completely before installation. • Please follow all local building and plumbing codes. • Product drawings in this installation guide is for illustration purpose only.
PAGE 4
Installation NOTE: This faucet does not include a pair of water supply hoses. A pair of water supply hoses with 1/2” FIP fittings are required for installation B A A. Shut off water supply at the valves. Remove old faucet and clean the mounting surface for installation of new faucet. C B. Remove the quick connector. E D D. Install the quick connector back onto the pipe and attach the pull down hose to the quick connector. Make sure the connection is tight to prevent water from leaking.