Have Assembly Questions? Missing Parts or Hardware? PLEASE DO NOT RETURN PRODUCT TO RETAILER Contact Our Customer Service Department: Tel: 714-729-3808 * 1-855-68-LUXEO * 1-855-685-8936 Monday to Friday * 9am – 5pm PST www.LuXeoUSA.
ASSEMBLY INSTRUCTIONS Please Register Your Product for Warranty https://www.LuXeoUSA.
HDPE USER CARE and MAINTENANCE 1. KEEP FURNITURE COVERED We suggest that you keep your furniture covered when not in use. Reduce exposure to sunlight by storing in a covered area. This will minimize fading and keep the life of your furniture longer. 2. CLEANING For Quick Cleaning - mix mild soap and warm water in bucket. Use clean cloth to wipe soapy mixture on surface and rinse off with water. For dirt and debris that may catch on surfaces clean with soft brush and rinse.
Outdoor Park City Gas Firepit Table Model: LUX-42FPSQ ASSEMBLY INSTRUCTIONS Important: Retain For Future Reference. Read Carefully. This product is intended for Outdoor Domestic use only. Not for Commercial use. Questions, Problems, Missing Parts? Before returning to your retailer, contact our excellent Customer Service Dept. 1-714-729-3808 * 1-855-68-LUXEO (Monday to Friday, PST) Email us: https://www.luxeousa.
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. This appliance has been tested to and complies with the ANSI Z21.97-2014, Outdoor Decorative Gas Appliances. When connecting to a fixed piping system, the installation must conform to local codes or in the absence of local codes, to the National Fuel Gas Code. ANSI Z223.1. NFPA 54; National Fuel Gas Code; National Gas and Propane Installation Code, CSA B149.
SAFETY INFORMATION This appliance has been tested to and complies withthe ANSI Z21.97–2O17,Outdoor Decorative Gas Appliances CGA CR 97–OO3 OutdoorGas Fireplaces.Theinstallationmust conform to local codes or in the absence of localcodestothe NationalFuelGasCode.ANSIZ223.1.This manual contains information about the assembly, operation and maintenance of this fire pit. General safety information is presented in these first fewpagesand is alsolocatedthroughoutthe manual.
OWNERS MANUAL Important: Read these instructions carefully before starting installation of the outdoor fire table. Before beginning assembly, make sure all parts are present. Compare parts with the package contents list and hardware contents above. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.
Square Fire Pit Flame/Wind Glass Guard Assembly Instruction Step1: Connect two pieces glasses together with provided clip. Clip Plastic glide Step 2: Install the plastic glide into a clip and install the clip to the bottom of the two glasses as shown. Secure the clip position with the screws. Step 3: Follow Step 1 and 2 to install the third piece of glass. Secure the position with the screws but do NOT tighten the screws.
Step 4: Follow Step 1 and 2 to install the fourth piece of glass. Secure the position with the screws but do NOT tighten the screws. Step 5: Install the final two pieces of clips and plastic glides. Secure the position with the screws but do NOT tighten the screws. Step 6: Adjust the glasses positions. Tighten all the screws and put the glass shield upside-down, so the plastic glides are at the bottom. The glass shield is now ready to use.
