Product Manual
LX1000-INS-LAB-RevB12
8
Before proceeding, ensure that all instructions in the previous section, ASSEMBLY, have been
followed, and that you have read the SAFETY section of this manual.
The photo at right shows the HybridLX
™
in Rollator
mode. To keep the backrest away from your hands,
position the backrest away from the handles as shown
at right.
1. Move your rollator slowly forward and always be
sure that the rear wheels are a few inches ahead of
your body.
2. Select a pace that is comfortable for you.
The rollator has loop locking handbrakes. To slow
down, squeeze the handbrakes upward toward the
handles. To hold the rollator in a stationary position,
push the handbrakes down, away from the handles, until the handbrakes lock into place; the rear
wheels will be locked in place. To release, pull the handbrakes upward toward the handles until
the rear wheels move freely.
1. Push the handbrakes down, away from the handles, until the handbrakes lock into the parked position.
2. Test the wheels before sitting down to ensure the rollator will not roll.
3. Before sitting, touch the back of your legs to the edge of the seat to ensure proper positioning
of the rollator.
4. Hold onto handles or top armrests of rollator if necessary to help you lower your body onto
the seat.
Rollator Mode
handle
backrest
handbrake
seat