Instructions / Assembly

ManualsBrandsLucas Oil ManualsAir Compressors, Tools & AccessoriesMidget Grease Gun

MINI GREASE GUN

Operation Guide

*This is a general instruction sheet which

covers multiple models. Model may not

match and accessories shown may not

come with your gun exactly.*

LOOSEN THE

COUPLER SLIGHTLY

BEFORE FIRST USE

TIP -

Replacing Your Grease Cartridge

MINI GUNMINI GUN

ROD HANDLEROD HANDLE

HEADHEAD

BARRELBARREL

TEFLON TAPETEFLON TAPE

PIPEPIPE

WRENCHWRENCH

COUPLERCOUPLER

FLEX HOSEFLEX HOSE

END CAPEND CAP

Priming Your Grease Gun

1 2 3

Preparing For Use

ALWAYS WORK

SAFELY BY WEARING

GLOVES AND

SAFETY GOGGLES

FOR TROUBLESHOOTING, TIPS, TRICKS, AND

MORE ONLINE, SCAN THE QR CODE ABOVE

Unscrew the head, then

pull the rod handle all the

way out and lock. Prepare

to insert the cartridge of

grease into the barrel.

Put pressure on the rod

handle while pulling down on

the barrel and pumping the

handle at the same time.

Attach hose or tube onto

your gun with the included

wrench. Ensure it’s fastened

tightly so it won’t leak.

Remove either the pull tab or foil

before threading into gun. Insert

bottom end rst, ridge is top side

and plastic cap is the bottom side.

While applying pressure,

rotate the handle then press

the quick release until the rod

goes into the barrel.

For a heavier duty seal, wrap

teon tape around the tting

between the gun and attachment.

Screw the head on, and

unlock the rod handle from

the end cap. Open the air

valve, if your gun has one. If

not, loosen the head slightly.

Pump the handle several

times until grease ows

from the coupler.

Prior to your rst use, apply

a layer of grease around the

outside of the rubber plunger.

Summary of content (2 pages)

PAGE 1
MINI GREASE GUN Operation Guide MINI GUN HEAD FLEX HOSE PIPE COUPLER BARREL ROD HANDLE TEFLON TAPE END CAP WRENCH *This is a general instruction sheet which covers multiple models. Model may not match and accessories shown may not come with your gun exactly.* Replacing Your Grease Cartridge Unscrew the head, then pull the rod handle all the way out and lock. Prepare to insert the cartridge of grease into the barrel. Remove either the pull tab or foil before threading into gun.
PAGE 2
MINI PISTOLA ENGRASADORA Manual de operaciones MINI PISTOLA CABEZA MANGUERA FLEXIBLE TUBO BARRIL MANGO DE VARILLA TAPA FINAL ENCUENTRA MÁS ACOPLADOR CINTA DE TEFLÓN LLAVE INGLESA Reemplazo de su cartucho de grasa Desatornille la cabeza, luego tire del mango de la varilla completamente hacia afuera y bloquee. Prepárese para insertar el cartucho de grasa en el cañón. Retire la lengüeta o el papel de aluminio antes de enroscarlo en la pistola.