Technical Specifications

ManualsBrandsLP Specialty ManualsBuilding materialsLP® SolidStart® LSL 2 x 4 x 8' Laminated Strand Lumber

SHOP-FABRICATED STRUCTURAL WOOD 06 17 00

SPEC-DATA

and MANU-SPEC

are registered trademarks of Reed Elsevier Inc. The three part MANU-SPEC format conforms to the editorial style of the Construction

061700_10002219_01_MS_22632

7/258 PTC

LP - Building Products

414 Union St.

Nashville, TN 37219

Phone: (800) 999-9105

Phone: (910) 762-9878

Fax: (910) 763-8178

E-mail:

customer.support@lpcorp.com

www.lpcorp.com

This MANU-SPEC® utilizes the Construction Specifications Institute (CSI) Project Resource Manual (PRM),

including MasterFormat™, SectionFormat™ and PageFormat™. A MANU-SPEC is a manufacturer-specific

proprietary product specification using the proprietary method of specifying applicable to project specifications and

master guide specifications. Optional text is indicated by brackets [ ]; delete optional text in final copy of

specification. Specifier Notes typically precede specification text; delete notes in final copy of specification.

Trade/brand names with appropriate trademark and registration symbols, product model numbers, styles and types

are used in Specifier Notes and in the specification text Article titled AAcceptable Material.@ Trademark and

registration symbols are not used in specification text. Metric conversion, where used, is soft metric conversion.

This MANU-SPEC specifies laminated strand lumber (LSL) as manufactured by LP - Building Products. Revise

MANU-SPEC section number and title below to suit project requirements, specification practices and section

content. Refer to CSI MasterFormat for other section numbers and titles.

SECTION 06 17 00

SHOP-FABRICATED STRUCTURAL WOOD

PART 1 GENERAL

1.01 SUMMARY

A. Section Includes: Laminated Strand Lumber.

Specifier Note: Revise paragraph below to suit project requirements. Add section numbers and titles per CSI MasterFormat and

specifier=s practice.

B. Related Requirements:

Specifier Note: Include in this Paragraph only those sections and documents that directly affect the work of this section. If a reader of

this section could reasonably expect to find a product or component specified in this section, but it is actually specified elsewhere, then

the related section number(s) should be listed in the paragraph below. Do not include Division 00 documents or Division 01 sections

since it is assumed that all technical sections are related to all project Division 00 documents and Division 01 sections to some degree.

Refer to other documents with caution since referencing them may cause them to be considered part of the Contract.

1. Section [06 10 00 Rough Carpentry] [______].

Specifier Note: Paragraph below may be omitted when specifying manufacturer’s proprietary products and recommended installation.

Retain References paragraph when specifying products and installation by an industry reference standard. If retained, list standard(s)

referenced in this section. Indicate issuing authority name, acronym, standard designation and title. Establish policy for indicating

edition date of standard referenced. Conditions of the Contract or Division 01 References Section may establish the edition date of

standards. This paragraph does not require compliance with standard. It is a listing of all references used in this section. Only include

here standards that are referenced in the body of the specification in PARTS 1, 2 and/or 3. Do not include references to building codes

at any level.

1.02 REFERENCES

A. International Code Council (ICC-ES):

1. Report Number: ICC-ES ESR-2403.

B. Canadian Construction Materials Centre (CCMC):

1. Report Number: CCMC 13319-R.

Summary of content (7 pages)

PAGE 1
SHOP-FABRICATED STRUCTURAL WOOD 06 17 00 061700_10002219_01_MS_22632 7/258 PTC ® LP - Building Products 414 Union St. Nashville, TN 37219 Phone: (800) 999-9105 Phone: (910) 762-9878 Fax: (910) 763-8178 E-mail: customer.support@lpcorp.com www.lpcorp.com This MANU-SPEC® utilizes the Construction Specifications Institute (CSI) Project Resource Manual (PRM), including MasterFormat™, SectionFormat™ and PageFormat™.
PAGE 2
SHOP-FABRICATED STRUCTURAL WOOD 06 17 00 ® LP - Building Products Specifier Note: Article below includes submittal of relevant data to be furnished by Contractor, either before, during or after construction. Coordinate this article with Architect’s and Contractor’s duties and responsibilities in Conditions of the Contract and Section [01 33 00 Submittal Procedures]. 1.03 SUBMITTALS A. General: Submit listed submittals in accordance with Contract Conditions and Section [01 33 00 - Submittal Procedures].
PAGE 3
SHOP-FABRICATED STRUCTURAL WOOD 06 17 00 ® LP - Building Products a. B. 1. Store materials protected from exposure to harmful weather conditions and at temperature conditions recommended by manufacturer. a. 2. C. Carefully unload lumber by lifting, using forklifts or cranes to avoid damage. Storage and Handling Requirements: Keep materials dry and store on a hard, dry, level surface not in contact with the ground. b.
PAGE 4
SHOP-FABRICATED STRUCTURAL WOOD 06 17 00 ® LP - Building Products below per project requirements and specifier’s practice. A. Manufacturer: LP - Building Products. 1. Contact: 414 Union St., Nashville, TN 37219; Telephone: (800) 999-9105, (910) 762-9878; Fax: (910) 763-8178; E-mail: customer.support@lpcorp.com; website: www.lpcorp.com. Specifier Note: If a Division 01 Section covers substitutions on a project-wide basis, do not repeat the requirement here.
PAGE 5
SHOP-FABRICATED STRUCTURAL WOOD 06 17 00 ® LP - Building Products Specifier Note: Paragraph below should list obligations for compliance with specific code requirements particular to this section. General statements to comply with a particular code are typically addressed in Contract Conditions and Section 01 41 00 - Regulatory Requirements. Repetitive statements should be avoided. C. D. Regulatory Requirements: 1. In accordance with Section [01 41 00 - Regulatory Requirements]. 2. [______].
PAGE 6
SHOP-FABRICATED STRUCTURAL WOOD 06 17 00 ® LP - Building Products c. 2. Acceptable Material: [______]. Nails: a. Type: [Common] [Box] [Sinker]. Specifier Note: For 1 3/4 inch (44.5 mm) LSL, manufacturer recommends 16d (3 1/2 inch nails). For 1 1/2 inch (38.1 mm) LSL, manufacturer recommends 10d (3 inch nails). b. 3. Size: [16d (3 1/2 inch)] [10d (3 inch)]. Bolts: a. Type: [______]. b. Size: [______]. c. Coating: [______]. PART 3 EXECUTION 3.01 EXAMINATION A. B.
PAGE 7
SHOP-FABRICATED STRUCTURAL WOOD 06 17 00 ® LP - Building Products d. Impose no loads other than the weight of the erectors on the structure before it is permanently sheathed. e. Exercise caution when removing temporary bracing to apply sheathing. f. After sheathing, do not exceed design loads on members with construction materials. g. All conditions calling for notched or drilled beams must be reviewed and approved by a licensed professional engineer. D. [______]. 3.05 CLEANING A.