User's Manual

Table Of Contents
Using the Main Menu14
To access the Event Status menu:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click INFORMATION, then click the EVENT STATUS tab.
The following alarms are shown in the Event Status menu:
No HDD: No Hard drive is detected.
Disk Error: Hard drive error detected.
Disk Full: Hard drive is full.
Net Disconnection: System is not connected to the network.
IP Conflict: More than one device on the network is using the same IP address.
MAC Conflict: More than one device on the network is using the same MAC address.
Video Loss: Shows disconnected channels.
Motion: Shows channels with active motion alarms.
14.10.4 HDD Info
Information related to the hard drives installed in the system, including capacity, status, and type.
To access the HDD Info menu:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click INFORMATION, then click the HDD INFO tab.
14.10.5 Online Users
The Online Users menu shows a list of users connected to the system using computers or mobile
devices.
#LX400111; r. 1.0/55872/56018; en-US 77