Installation Guide

Hot

Cold

Hot

Rags

1/2" FIP Hose

Installation Guide

1 SHUT OFF WATER SUPPLIES. Remove old faucet.

Place gasket (1) on bottom of new faucet. If your model has a spray,

proceed to step 2. If your model does not have a spray skip to step 4.

6 FOR MODELS WITHOUT SPRAY: FLUSH SYSTEM/CHECK FOR

LEAKS.

Remove aerator (1). Turn on hot and cold water supplies. Turn handles

to full open position for one minute. Check for leaks at arrows. Replace

aerator.

4 CONNECT TO WATER SUPPLIES. (HOOK-UPS NOT PROVIDED).

2 Place faucet through mounting holes in sink.

OPTION: If sink is uneven, use silicone sealant under the gasket.

3 Secure faucet to sink using locknuts (1) provided.

5 Connect and tighten the supply hoses.

Check for leaks.

Please contactlordearproducts@gmail.com rst ,

If you have any questions or need help.

PAGE 1
Installation Guide 1/2" FIP Hose Please contactlordearproducts@gmail.com first , If you have any questions or need help. 1 SHUT OFF WATER SUPPLIES. Remove old faucet. Place gasket (1) on bottom of new faucet. If your model has a spray, proceed to step 2. If your model does not have a spray skip to step 4. 2 Place faucet through mounting holes in sink. OPTION: If sink is uneven, use silicone sealant under the gasket. Rags 3 Secure faucet to sink using locknuts (1) provided.
PAGE 2
Package Includes： Installation Guide 1x PC Kitchen Sink Faucet 1x PC Side Sprayer 1x PC Hot & Cold Water Supply Hoses Please contact lordearproducts@gmail.com first , If you have any questions or need help. 1 Mount spray support (1) in far right hole in sink. 2 Connect the spray hose to the faucet. (1) 3 FOR MODELS WITH SPRAY: FLUSH SYSTEM/CHECK FOR LEAKS. Remove aerator (1), spout bonnet (2) and spout (3). Replace spout and spout bonnet. Turn on hot and cold water supplies.