RECOMMENDED TOOLS AND MATERIALS ¨ ¨ ¨ ¨ ¨ ¨ ¨ Silicone Sealant Adjustable Wrench Tape Measure Basin Wrench Phillips Screwdriver Pencil Masking Tape BEFORE YOU BEGIN There are a variety of things to do before installing any new plumbing system into your home or residence.
INSTALLATION OF THE FAUCET 2 Before starting turn off both the hot and cold water supply lines and remove the old faucet. Clean around all areas of attachment before placing new faucet on sink to help prevent corrosion after installation. Determine the direction you would like the handle to face when in the off (down) position. Generally, when installed in the center of the sink, this would be straight forward and when installed in the corner of the sink, diagonally across the sink.
Guarantee Repairs Claims Connect Supplies Connect hot water supply to longer of the two flexible supply hoses and cold water supply to shorter of these hoses. Flexible supply hoses are complete with 3/8” compression fittings for your convenience. With all pipe attachments plumbers tape can be utilized to help reduce the risk of leaking. 5 Flush Lines Pull the sprayer out to partially expose the hose. Position the hose in the sink.