Installation & Assembly

1
Installation Instructions for
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliantNEC
junction boxes.
This product is safety listed for damp locations.
Install the fixture arms to the hub by installing the short arm screws through the inside of the hub and into the fixture
arms using the Allen key to secure them together.
Install the lower ring to the bottom of the frame using the long arm screws and Allen key.
Place the upper ring onto the frame followed by the fixture arms and secure them together using the long arms screws
and Allen key.
Feed the fixture cord through the fixture arm assembly and screw the socket assembly to the fixture arm assembly.
Place the cover onto the threaded nipple and screw on the fixture loop.
Install the candle follower by placing it on top of the candle tube. Repeat for remaining candle followers.
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage information.
Adjust the chain to the desired length and attach it to the canopy loop and fixture loop with the adjustable chain links.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
2
1A
3
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
Pendant
9
6
CANDLE TUBE
CANDLE FOLLOWER
FRAME
LAMP
7
FIXTURE
ARM
SHORT ARM
SCREW
ALLEN
KEY
HUB
FIXTURE ARM
ALLEN KEY
LONG ARM SCREW
UPPER RING
LOWER RING
SOCKET ASSEMBLY
1
FIXTURE ARM ASSEMBLY
4
5
6
7
FIXTURE LOOP
& COVER
8
3
4
5
3
2 2
9
CHAIN
ADJUSTABLE
CHAIN LINK
8
FIXTURE LOOP
CANOPY LOOP
4 and 8 Light Pendant