See Better with Smart Lights Installation and Operating Manual The clock version 6028B 3872B 6028 3872 The standard version 3036B 2436B 3535B 2436F
See Better with Smart Lights WARNING AND SAFETY INSTRUCTIONS Please make sure that you carefully read through this instruction sheet refer back to them during installation to ensure your product is fitted safely and correctly before installing your LED Lighted Mirror fixture. Keep these instructions for future use. WARNING Risk of Fire and Electric Shock ● All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
See Better with Smart Lights CHECK PRODUCT LIST AFTER OPENING THE PACKAGE ● LED Lighted Mirror ● Mounting bar ● Installation Manual ‐‐1 pcs ‐‐1 pcs ‐‐1 pcs ● Screws for wall ● Type A Plastic Anchor ● Type B Plastic Anchor ‐‐3~6 ‐‐3~6 ‐‐3~6 pcs pcs pcs TOOLS YOU MAY NEED INSTALLATION MANUAL 1 Level and mark the location (vertically hanging and horizontally hanging) Notes: 1. 2. 3.
See Better with Smart Lights 2 Place the mounting bar against the 3 Drill the holes and place wall and make some marks on the wall the suitable plastic anchors 5 Connect the mirror with the main supply. 4 Screw the mounting bar onto the wall with the screw ● We provide plug with mirrors. ● Optional to cut the plug directly, then connect to electrical wiring if using wall switch.
See Better with Smart Lights OPERATION INSTRUCTION ON/OFF and CCT adjustment ON/OFF button ON/OFF and Dimmer Button turns blue when connected to main supply. Button always on as long as connecting to main supply. Short‐touch the button to turn on/off the mirror. Adjusting color temperatures (CCT) between warm white and cool white by long‐touching the button for seconds. ● Finish setting by withdrawing your finger when the color reaches the one you need.
See Better with Smart Lights Clock/Temperature (This operation is specific to the clock version) ● Turn off the light to set the clock. ● Long touch button 1 or 2 for seconds, the Hour will flash, then short‐touch button 1 and 2 to set Hour. ● Wait for seconds after setting up the Hour, then it will automatically switch to the Minute flash. ● Short‐touch button 1and 2 to set up the Minute. ● Wait seconds after you finish the time setting, the time will be saved automatically.