Use and Care Manual

Recommended Surface
smooth ceramic tiles backsplash, smooth glass tiles backsplash, acrylic wall panel, pained
gypsum, wall linoleum, stainless metal, mirror, laminate, wallpaper (if some corners are
peeling, just peel them off and install tiles over them).
Non-Recommended Surface
Orange peel texture wall, oily wall, brick wall, stucco wall, stone wall, unfinished wall
(gypsum or plaster), unpainted plywood.
Wall & Tile Temperature
The temperature of the wall and tiles should be at least about 70°F for 12 hours before
installation and 24 hours after installation. This is very important because if wall and tiles
are cold, the tiles will not stick well. During the winter, the wall temperature is usually lower
than room temperature so make sure that your walls are warm.
Press All Grout Lines Firmly
Make sure you press ALL grout lines firmly, and try NOT to touch the adhesive side as
much as you can.