User's Manual

Keypad Description
Before using the keypad, read the following keypad descriptions.
Note: As the display changes, the keys may perform different functions.
Initial Power Up and Time Set
1. After the transmitter initializes, the date set menu is shown, type in the current date (Using
MM/DD/YY) and press ENTER.
2. When the display asks to enter time, type in the current time and select F1 (AM) or F2 (PM).
Long Range Systems 5 T7400A User Manual
T7400
Long Range Systems
8
00.437.4996
F1
F2
F3
F4
SETUP
MGR1
MGR2
MODE
CLEAR
ENTER
1
2
3
4
5
6
7
8
9
0
A
BC
D
EF
GHI
JKL
MNO
PQR
STU
VW
XYZ
[
12:00: 36 am
Guest #: ---
F Keys
The F (function) keys are
the first row of keys under
the display. The F1 - F4
keys correspond to the
bottom row of text in the
keypad display window.
Number Keys
Keys 1 through 0 enter
numeric data such as the
pager number. In some
modes they will also
enter alphanumeric data.
Setup Key
The Setup key enables
menus when checking or
changing the transmitter’s
programmed settings.
Mgr 1 and Mgr 2 Keys
Mgr1, Mgr2, and Staff
keys are used to page a
manager. Mgr1 and
Mgr2 keys can be as-
signed to a specific pager.
Staff (Pager) Key
The Staff key is used to
temporarily change the
paging function to page
Staff pagers.
Clear Key
The Clear key is used to
clear the input when
paging a pager or
coaster and return to the
Guest paging display or
to restart an input when
programming.
Enter Key
The Enter key is used to
start the paging function,
and to complete pro-
gramming where re-
quired.