ASSEMBLY INSTRUCTION Please read the instruction carefully before assembly.
F Right armrest 1 G Cushion 1 H Washer 4 I Screw (M8×45) 8 J Hex key 1 K Screw washer 8 Please check and make sure you have all the parts available before you start with the assembly. Assembly should be performed on a clean and soft surface, e.g. flat carton box can be used.
STEP 1 Put left armrest on the ground and put one screw washer on each screw, then screw left armrest to the chair base. Please do not tighten any screw to the end before you’ve connected all screws. Please make sure the bottoms of chair base and armrest are at the same level. D I K I E STEP 2 Repeat step 1 to screw the right armrest. Then, seal the cloth of the chair base. E Seal the cloth E F D F STEP 3 Please stand behind the chair and gently inser t the chair back into the chair base.
STEP 4 Put one washer on one front chair leg, then insert threaded leg into the mounted position. Gently screw the leg into chair base. Make sure the leg is screwed tightly. Repeat the same process for the other 3 legs. Please make sure the bottoms of 4 legs are at the same level. C H A A B STEP 5 Put cushion properly. Finish and enjoy you chair. CAUTION! THE CHAIR CAN ONLY BE USED ON A FLAT SURFACE TO AVOID ANY ACCIDENTS. Care and Maintenance 1.Do not place it near any fire, heater, or flame. 2.
