User's Guide

26
SETTING THE ALARM
ACTIVATING/DEACTIVATING THE ALARM & TEMPERATURE PRE-ALARM
The temperature pre-alarm will alert you 30 minutes prior to your alarm time whenever the outdoor
temperature falls below 26.5°F (-3°C).
1. In normal operating mode, press the ALARM button to display the set alarm time for ve (5) seconds.
2. When the alarm time is being shown on the LCD display, press the ALARM button again to cycle
through the alarm functions as shown below. The corresponding icons will appear on the LCD display.
If you’d like to use your display console as an alarm clock, follow these instructions to set the alarm
time:
1. In normal operating mode, press and hold the ALARM button for two (2) seconds until the alarm
hour starts ashing. This indicates that you have entered the alarm time setting mode.
2. Use the or buttons to adjust the alarm hour. Press and hold either button to move through
the hours quickly.
3. Press the ALARM button again to conrm the alarm hour and move to adjusting the minutes. The
minute digits should be ashing.
4. Use the or buttons to adjust the alarm minute. Press and hold either button to move
through the minutes quickly.
5. Press the ALARM button to save and exit the menu.
NOTES:
• Once you have an alarm set, the icon will be displayed next to the time on the LCD display.
• The alarm function will be activated automatically once you set a time.
3. When the clock reaches the designated alarm time, the alarm sound will start playing.
4. To stop the alarm:
a. Allow the alarm to continue for two minutes and it will stop itself automatically. It will remain set
for the following day.
b. Press the SNOOZE/BACKLIGHT button on top of the unit to snooze the alarm for ve minutes.
The snooze can be set continuously for 24 hours. We don’t recommend doing that, though. While
the console is in snooze mode, the alarm icon will continue ashing.
c. Press and hold the SNOOZE/BACKLIGHT BELL for two (2) seconds to stop the alarm completely.
It will stay set for the following day.
d. Press the ALARM button to stop the alarm completely. It will remain set for the following day.
Northern Hemisphere Icons Southern Hemisphere IconsMoon Phase
New Moon
Waxing Crescent Moon
First Quarter Moon
Waxing Gibbous Moon
Full Moon
Waning Gibbous Moon
Third Quarter Moon
Waning Crescent Moon
NOTE:
- In alarm mode, the “
” icon will display on the LCD.
Alarm o Alarm on Alarm with ice-alert
Temp/Humidity Trend
Arrow Icon
Rising Steady Falling
Too cold Comfortable Too hot
No signal Weak signal Good signal