MSDS

ManualsBrandsLoctite ManualsPaint0.85 fl. oz. Quick Set Epoxy

Item No. : 1289278

Product name: Loctite Quick Set Epoxy Resin

1 of 4

Material Safety Data Sheet

Revision Date:

3/28/2008

Issue date: 03/03/2009

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Product name: LOCTITE QUICK SET EPOXY - RESIN Item No. : IDH 1289278

Product type: Epoxy Resin

Region: United States

Company address:

Henkel Corporation

32150 Just Imagine Drive

Avon, Ohio 44011

Contact Information:

Telephone:

440.937.7000

Emergency telephone:

800-424-9300

2. COMPOSITION/INFORMATION ON INGREDIENTS

Hazardous components % ACGIH TLV OSHA PEL OTHER

Epichlorohydrin-4,4'-isopropylidene

diphenol resin

25068-38-6

60-100 None None None

Phenyl glycidyl ether

122-60-1

0.1-1 0.1 ppm TWA

(skin)

10 ppm TWA

60 mg/m³ TWA

None

3. HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW

HMIS:

Physical state: Liquid

HEALTH: 2*

Color: Translucent Clear

FLAMMABILITY: 1

Odor: None

PHYSICAL HAZARD: 0

Personal Protection: See Section 8

WARNING:

MAY CAUSE ALLERGIC SKIN REACTION.

MAY CAUSE EYE, SKIN AND RESPIRATORY TRACT IRRITATION.

Relevant routes of exposure: Eye contact, Ingestion, Inhalation, Skin contact

Potential Health Effects

Inhalation: Mild respiratory tract irritation.

Skin contact: Allergic skin reaction. Moderate skin irritation. Itching. Redness.

Eye contact: Moderate eye irritation. Redness.

Ingestion: Not expected under normal conditions of use.

Existing conditions aggravated by

exposure:

Skin disorders. Skin allergies.

See Section 11 for additional toxicological information.

Summary of content (9 pages)

PAGE 1
Material Safety Data Sheet Revision Date: 03/28/2008 Issue date: 03/03/2009 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product name: LOCTITE QUICK SET EPOXY - RESIN Product type: Epoxy Resin Company address: Henkel Corporation 32150 Just Imagine Drive Avon, Ohio 44011 Item No. : IDH 1289278 Region: United States Contact Information: Telephone: 440.937.7000 Emergency telephone: 800-424-9300 2.
PAGE 2
4. FIRST AID MEASURES Inhalation: Remove to fresh air. If symptoms develop and persist, get medical attention. Skin contact: Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and shoes. Get medical attention if symptoms occur. Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention. Ingestion: DO NOT induce vomiting unless directed to do so by medical personnel. Keep individual calm.
PAGE 3
9. PHYSICAL AND CHEMICAL PROPERTIES Physical state: Color: Odor: Vapor pressure: pH: Boiling point/range: Melting point/range: Specific gravity: Vapor density: Evaporation rate: Solubility in water: Partition coefficient (n-octanol/water): VOC content: Liquid Translucent Clear None 0.03 mmHg Not applicable Greater than 260.2°C (500°F) Not available 1.17 Not available Not available Slight Not available 0.098% (value for resin and hardener together) 10.
PAGE 4
U.S. Department of Transportation Ground (49 CFR): Proper shipping name: Not regulated Hazard class or division: None Identification number: None Packing group: None International Air Transportation (ICAO/IATA): Proper shipping name: Not regulated Hazard class or division: None Identification number: None Packing group: None WaterTransportation (IMO/IMDG): Proper shipping name: Hazard class or division: Identification number: Packing group: Marine pollutant: Not regulated None None None None known 15.
PAGE 5
Material Safety Data Sheet Revision Date: 03/28/2008 Issue date: 03/03/2009 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product name: LOCTITE QUICK SET EPOXY HARDENER Product type: Epoxy Hardener Company address: Henkel Corporation 32150 Just Imagine Drive Avon, Ohio 44011 Item No. : IDH 1289278 Region: United States Contact Information: Telephone: 440.937.7000 Emergency telephone: 800-424-9300 2.
PAGE 6
4. FIRST AID MEASURES Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. Skin contact: Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention if symptoms occur. Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
PAGE 7
See Section 2 for exposure limits. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical state: Color: Odor: Vapor pressure: pH: Boiling point/range: Melting point/range: Specific gravity: Vapor density: Evaporation rate: Solubility in water: Partition coefficient (n-octanol/water): VOC content: Liquid Amber Clear Mercaptan, Amine Not available Not applicable Not available Not available 1.04 Not available Not available Slightly soluble Not available 0.098% (value for resin and hardener together) 10.
PAGE 8
12. ECOLOGICAL INFORMATION Ecological information: Not available 13. DISPOSAL CONSIDERATIONS Information provided is for unused product only. Recommended method of disposal: Dispose according to EPA and local governmental regulations. EPA hazardous waste number: Not a RCRA hazardous waste. 14. TRANSPORT INFORMATION The shipping classifications in this section are for non-bulk packaging only (unless otherwise specified). Shipping classification may be different for bulk packaging. U.S.
PAGE 9
16. OTHER INFORMATION This material safety data sheet contains changes from the previous version in sections: 14 Prepared by: Regulatory Affairs 3/8/08 Rev 3/3/09 DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, Henkel Corporation does not assume responsibility for any results obtained by persons over whose methods Henkel Corporation has no control.