Instructions / Assembly
Revision: April 6, 2018
Supersedes: August 29, 2016
Ref. #: 507071
TECHNICAL DATA SHEET
Loctite® Super Glue Professional
Page 1 of 3
Loctite® Super Glue Professional has proven superior performance over ordinary super glues. It
works faster and holds stronger on more surfaces than ordinary instant adhesives thanks to a
patented additive. The liquid formula works well on a variety of porous and non-porous surfaces and
close-fitting repairs. Loctite Super Glue Professional’s super strength formula is ideal for heavy-duty
projects and repairs. It dries clear and sets without clamping. Loctite Super Glue Professional is
resistant to moisture most chemicals and freezing temperatures.
Use for repairing figurines, costume jewelry, cameras, toys, metal car parts, wiper blades, rubber
seals and O-rings. Bonds leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic,
rubber and hard plastics such as acrylic, polycarbonate, polystyrene and PVC.
• Does not bond to Polyethylene (PE), polypropylene (PP), polytetrafluoroethylene (PTFE),
silicone or foam rubber, polystyrene foams, glass, or pure bone china
▪ Not for assemblies which will hold hot liquids
▪ Bonded items should not be placed in oven, microwave or dishwasher
▪ Not for exterior applications
▪ Do not use on glazed surfaces
▪ Not for repairs needing high flexibility or for gap-filling applications
Feature
Benefits
Dries clear and colorless..……………..………..
Sets in seconds……………..……………………
Precise application………….……………………
Invisible repairs
No clamping required
Pinpoint nozzle
Typical Uncured Physical Properties
Typical Application Properties
Color:
Clear and Colorless
Application Temperature:
Do not apply below 50F (10C)
Appearance:
Liquid
Odor:
Sharp, irritating (use in a well-ventilated area)
Base:
Ethyl cyanoacrylate
Set Time:
5 to 45 seconds (see Table 1) *
Specific Gravity:
1.05
Handling Time:
Leave undisturbed for at least 5 minutes.
For best results, allow full bond strength to
develop overnight before handling.
VOC Content:
< 2% by weight, CARB
< 20 g/l, SCAQMD rule 1168
Max. Strength Cure Time:
12 – 24* hours
*Times are dependent on temperature, humidity,
porosity of surface bonded and amount of
adhesive used
Flashpoint:
176°F (80°C) to 200°F (93°C)
Clean Up:
Scrape away cured adhesive
using a sharp-edged tool.
Item #
Package
Size
1365882
Carded Bottle
20g
1405419
Carded Bottle
20g
1461229
Carded Bottle
20g
DESCRIPTION:
RECOMMENDED FOR:
FEATURES & BENEFITS:
LIMITATIONS:
Super Glue Professional
Henkel Corporation
Professional and Consumer Adhesives
Rocky Hill, CT
Phone 1-800-624-7767
www.henkel.com www.loctiteproducts.com
TECHNICAL DATA