User's Manual
Table Of Contents
10.2：
Ensure the SD card that comes
with Vision Connect is properly inserted.
SD card is included
10.3：
Ensure to plug the LAN cable to
the nearest Wi-Fi router to Lockly Vision.
1ft cable (S) Included
10.4：
Plug the USB adapter to
a wall socket.
STEP 10. VISION CONNECT HUB SETUP
10.5：
After connecting to power, wait
for 2 minutes for Vision Connect to self
calibrate. Once the LEDs turned RED
and blinking yellow, Vision is ready to
connect.
IMPORTANT: Refer to Vision Connect Troubleshooting Guide if the LEDs do not meet the
described conditions.