Installation Guide

INSTALLING THE INTERIOR ASSEMBLY (F)
7
Step 3
continued
5: Plug the cable coming through mounting plate into the interior assembly as
shown. Tuck cable under eyelet hooks and route to the right on interior assembly .
Plug into , match red side
of plug with red on socket - insert
tightly.
X
X
Y
Y
D F
F
IMPORTANT:
If you need to disconnect this cable, use a
screwdriver to hold down the tab (marked
red) before carefully unplugging. DO NOT
FORCE as this may result in damaging the
lock.
1
2
Install Cable Remove Cable