Installation Guide

*This hole (O) is for the optional Slotted Barrel

Extension provided for stabilizing your lock. It

will require drilling extra hole on your door (See

template as provided). Alternatively, you may

use the double-sided adhesive tape provided

which serves the same purpose if you do not

want to drill a hole. If you drilled a hole, securely

tighten the post with a flathead screwdriver

by turning it clockwise before mounting on your

door.

Peel paper off the

Adhesive tape

1: To secure Exterior Assembly of lock, peel the cover off the adhesive strips

INSTALLING THE EXTERIOR ASSEMBLY

Step 2

2: Peel film from adhesive strips and make sure torque blade is in the vertical position with

the deadbolt extended. Place assembly and torque blade through the deadbolt slot and

guide connection cables through the cross-bore hole under the deadbolt as shown. Complete

mounting by aligning and securing until flush to exterior door surface.

EXTERIOR VIEW

(1)

Vertical

Extended

Under