Verticutter Mower TVM-3077 and TVM-5130 Parts Manual Locke Turf 307 Highway 52E, Opp, Alabama 36467, (334) 493-1300
TVM 3077 & TVM 5130 VERTI - CUTTER INDEX SECTION DESCRIPTION SECTION Mainframe and Related Parts Guards 1 2 Drives, Gearboxes, Belts, Driveshafts 3 Wheels, Axles, Hubs 4 Hydraulics 5 Mowing Units 6 Decals 7 PART DESCRIPTION Belt Idler Compensator, Single Dual Cutter Head, TVM 3077 Cutter Head, TVM 5130 Adjusting Wheel Decals Driveshaft, C.V.
1 11 32 33 14 4 5 13 10 8 12 8 9 6 7 23 36 21 7 22 30 29 35 31 7 28 8 26 19 24 20 6 18 25 2 3 27 16 34 15 Main Frame TVM 5130 Verti Cutter REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PART NO. QTY DESCRIPTION REF. NO. PART NO.
1 5 7 4 9 7 2 5 10 8 12 9 17 14 11 16 19 13 15 30 17 23 21 17 3 26 24 16 15 14 2 29 24 18 28 13 20 6 25 27 TVM 5130 Equalizer and Lift Arm Assembly REF. PART NO. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 50022328 50022329 50019948 50019873 50019872 50019644 44606 19021 50019914 19517 50019659 1273 25H49039 21020510 44174 15830 QTY 1 1 4 1 2 12 2 2 2 2 2 2 4 4 4 8 DESCRIPTION REF. PART NO. NO. Lift Arm (5 Gang) LH Lift Arm (5 Gang) RH Bearing Cup Assy.
23 21 21 11 8 10 24 23 9 12 4 1 30 22 14 29 7 30 5 6 2 29 19 18 15 3 6 17 7 26 28 25 5 27 13 Main Frame TVM 3077 REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NO. 50022352 50022176 50019541 50019888 15093 15806 8151600 44721 50019944 50019942 44600 10151200 50019542 50022109 50019877 QTY 1 1 1 1 10 10 10 1 1 1 1 1 1 1 1 DESCRIPTION REF. NO. Mainframe Tongue W/Decals Swivel Tongue Brace, RH HHCS 1/2”-13 x 1-1/2” Gr.5 Lock washer 1/2” Hex Nut 1/2” HHCS 3/8”-16 x 3/4” Gr.
14 15 26 17 6 10 19 11 16 18 5 15 28 12 16 9 13 5 15 4 15 3 25 14 10 13 2 12 29 6 11 8 22 7 20 20 5 21 21 TVM 3077 Lift 23 24 REF. NO. 19 20 21 22 23 24 25 26 27 28 PART NO. QTY 25H49039 21020510 15093 15806 8151600 10151200 20035 15812 50019854 50019644 4 4 4 4 4 4 2 2 1 8 DESCRIPTION Pin 3/8” x 1-3/4” Cotter Pin 5/32” x 1” HHCS 1/2” x 1-1/2” Gr.5 Lockwasher 1/2” Hex Nut 1/2” Jam Nut 3/8” HHCS 3/8” x 1/2” Lockwasher 3/8’ SMV Sign Fender Washer 1/4” x 1” REF. NO.
10 4 9 7 3 2 1 2 11 5 8 3 6 7 12 Single Compensator and Tie Rod Assemblies Reel Unit No. 4 (TVM-5130) Reel Unit No. 1 (TVM-3077) REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 PART NO.
10 4 5 9 7 3 2 1 2 11 8 3 7 3 6 5 2 1 4 Dual Compensator and Tie Rod Assemblies Reel Unit No. 4 (TVM-5130) Reel Unit No. 1 (TVM-3077) REF. NO. 1 2 3 4 5 6 7 8 9 10 11 PART NO.
10 8 11 5 10 8 6 11 7 12 13 9 14 8 1 15 4 13 3 14 2 12 13 14 Primary Guards REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NO. QTY 50022175 50022072 50022074 50022065 50019968 50019971 50100034 50100033 15806 44588 20054 15829 20035 15812 15830 1161006 1 1 1 1 1 1 2 2 4 2 2 2 2 3 3 1 DESCRIPTION Guard w/Decals - Driveshaft Danger Decal Decal - Notice to Owner Danger Decal (Spanish) R.H. Drive Guard L.H.
Right Side 3 3 Forward Left Side 2 1 6 4 5 2 9 V-Belt Guards TVM-5130 8 7 REF. NO. 1 2 3 4 5 6 7 8 9 PART NO. QTY 50019931 50019933 50019934 1161006 15801 15907 20009 15905 15918 1 2 2 5 5 5 5 5 5 DESCRIPTION Guard, Center Rear #1 Guard, L.H. Outside #2 & #4 Guard, R.H.
Right Side 3 Forward Left Side 2 1 6 4 5 9 8 7 V-Belt Guards TVM-3077 REF. NO. 1 2 3 4 5 6 7 8 9 PART NO. QTY 50019931 50019933 50019934 1161006 15801 15907 20009 15905 15918 1 1 1 5 5 5 5 5 5 DESCRIPTION Guard, Center Rear #1 Guard, L.H. Outside #2 & #4 Guard, R.H.
10 9 7 2 6 1 9 8 3 4 11 5 REF. NO. Gearbox & Sheaves TVM-5130 1 2 3 4 5 6 7 8 9 10 11 3-1 PART NO. QTY 50022102 50022324 50019943 15806 20864 50022420 50022107 50022085 65485 50022450 50022451 1 1 1 4 4 1 2 3 2 3 2 DESCRIPTION Gearbox Assy. (Comer) TVM-50 Vent Plug Spacer, Gearbox Lockwasher 1/2” HHCS 1/2”-13 x 3” Gr.5 Pulley, 3 Belt 7” Dia. Bushing, Tapered Split SK 1-1/8” Pulley, 2 Belt 7” Dia.
4, 21, 22, 23 6 1 8 4, 21, 22, 23 20 3 5 7 3 10 5 2 2 9 11 19 12 13, 15, 24, 25 5 3 14 5 18 13, 15, 24, 25 17 12 16 50022102 Gearbox Assembly TVM-5130 Manufactured by Comer REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 PART NO. QTY 70292 70108 70133 70642 70797 70903 50022316 50022317 70470 50022318 50022319 50022320 70332 1 3 3 2 4 4 1 1 1 1 1 1 2 DESCRIPTION REF. NO. Oil Plug 3/8” Oil Seal 35 x 72 x 10mm Snap Ring 72 UNI7437 Shim 60.3 x 71.7 x 1 Bearing 30207 Bolt M8 x 14 Gr.8.
8 9 2 6 1 7 8 11 3 4 10 5 REF. NO. Gearbox & Sheaves TVM-3077 1 2 3 4 5 6 7 8 9 10 11 PART NO. QTY 50019729 50022324 50019943 15806 20864 50022086 50022108 65485 50022450 50022451 50022085 1 1 1 4 4 1 2 2 3 2 1 3-3 DESCRIPTION Gearbox Assy. (Omni) TVM-3077 Vent Plug Spacer, Gearbox Lockwasher 1/2” HHCS 1/2”-13 x 3” Gr.5 Pulley, 1 Belt 7” Dia. Bushing, Tapered Split SDS 1-1/8” Key 2” “V”-Belt BX-78 “V”-Belt BX-70 Pulley, 2 Belt, 7” Dia.
18 1 5 3 19 8 6 9 14 15 9 19 4 17 11, 12, 13 14 17 8 2 10 7 50019729 Gearbox Assembly Mfg. By Omni 1:1.5 1-3/8”-6 Spline Input Shaft TVM-3077 REF. NO. 1 2 3 4 5 6 7 8 9 10 PART NO. QTY 50022476 50022477 50022478 50022479 50022480 50022481 50022482 70797 50022485 50022486 1 1 2 1 1 1 1 4 2 1 DESCRIPTION REF. NO. Housing Cap, Cantilevered Cap, Thru Gear, 24T Pinion, 16T Shaft, Output Shaft, Input Bearing, 30207 Seal, Thru Cap Seal, Cant.
2 3 4 22 7 8 9 10 6 1 12 5 14 15 17 21 15 16 13 18 11 19 20 50022104 P.T.O. Shaft and Parts REF. NO. 1 2 3 4 5 6 7 8 9 10 11 PART NO. QTY 50022676 50022677 50022678 50022679 50022680 50022681 50022682 50022692 64694 50022684 50022685 1 1 1 1 1 1 1 1 1 1 1 DESCRIPTION REF. NO.
7 9 4 1 8 11 3 6 5 4 2 9 7 5 6 11 8 Front Jackshaft Assembly TVM-5130 & TVM-3077 REF. NO. 1 2 3 4 5 6 7 8 9 10 11 PART NO. QTY 50022087 50022106 65484 50022101 44614 15819 1 1 1 2 4 4 2 2 2 1 4 50022105 93810 50019878 8151400 DESCRIPTION Pulley 2 Belt 6.6PD Bushing Split Taper SDS 1” Key 2” Bearing 1” 2 Hole Flange HHCS 7/16”-14 x 1-1/4” Gr.5 Lockwasher 7/16” Pulley 1 Belt 4.4 PD Bushing Split Taper SH 1” Key 1” x 1/4” Front Jackshaft Hex Nut 7/16”-14 Gr.
3 5 13 4 5 4 16 1 15 10 14 16 15 11 3 9 6 12 8 7 13 4 5 2 14 15 16 3 Rear Jackshaft Assembly REF. NO. 1 2 3 4 5 6 7 8 PART NO. QTY 50022327 50019883 50022084 50022105 93810 50022419 50022428 50019884 1 1 3 1 5 1 1 1 DESCRIPTION REF. NO. RH Rear Jackshaft LH Rear Jackshaft Pulley, 1 Belt 4.4 PD Bushing, Split Taper SH 1” Key 1” x 1/4” Pulley, 3 Belt 6.6 PD Bushing, Split Taper SD 1” 3” Key 9 10 11 12 13 14 15 16 3-7 PART NO.
22 99 10 10 3 3 44 11 11 77 5 5 66 10 10 11 11 88 99 11 22 Rear Jackshaft Assembly REF. NO. 1 2 3 4 5 6 7 8 9 10 11 PART NO. QTY 50022334 8151400 50022084 50022105 93810 50022088 50022106 50019884 44618 50022101 15012 1 4 1 1 1 1 1 1 4 2 4 DESCRIPTION Jackshaft, Rear-3 Gang Hex Nut 7/16”-14 Gr5 Pulley, 1 Belt 4.4” PD Bushing, Split Taper SH 1” Key 1/4” x 1/4” x 1” Pulley, 1 Belt 6.
6 4 7 1 2 3 5 Belt Idler Assembly REF. NO. 1 2 3 4 5 6 7 PART NO. QTY 50019889 50019912 50019890 50019891 15829 44539 20864 50019892 50019913 1 1 1 1 2 1 1 1 1 DESCRIPTION Idler Shell 2-1/2” Idler Shell 2” Bearing, 1” ID x 52 mm OD Bushing 1” OD x 2” Flatwasher 1/2” Nylock Hex Nut 1/2”-13 HHCS 1/2”-13 x 3” Gr.5 Belt Drive Idler Assy. 2-1/2” Belt Drive Idler Assy.
16 6 4 5 15 1 7 11 8 10 9 7 12 8 Wheel, Axle and Hub Assembly 2 14 3 13 REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PART NO. QTY 50019879 50022630 50022625 50022628 50022626 50022629 50022632 52012 50022631 170 22 120 50019662 20166 50022633 50022627 50022178 50019920 50022364 15515 50022095 1 1 1 1 1 1 1 5 1 2 2 1 1 1 1 1 1 1 1 5 1 DESCRIPTION Axle 10” Tire, 18 x 8.5 x 8 (Ribbed) TVM-5130 Tire, 18 x 8.5 x 8 (Highway) TVM-5130 Tire, 16 x 6.
9 10 8 4 5 6 11 7 4 2 3 1 Hydraulic System TVM-5130 REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 PART NO. QTY 50022177 50022590 50022093 50022094 50019926 50019925 50019927 50019928 50022091 50022092 50022090 50019929 50022079 1 1 1 1 2 1 1 1 2 2 2 1 1 DESCRIPTION Hydraulic Cylinder 2-1/2” Bore x 10” Stroke x 1” Rod Dia.
5, 5A 4 3 2 1 Hydraulics for Lift Bundle TVM-3077 REF. NO. PART NO. QTY 1 2 3 4 5 50022092 50022090 50022091 50022094 50022089 2 2 2 2 2 5A 50022590 1 DESCRIPTION Coupler 1/2” NPT Adaptor 1/4” FNPT to 1/2” MNPT Hose 1/4” FNPT to 1/2” MNPT Elbow 45° 1/4” MNPT to 1/4” FNPT Hydraulic Cylinder 2.5” Bore x 10” Stroke x 1-1/2” Rod Dia. Seal Kit for 50022089 Hydraulic Cyl.
1 1 3 3 2 2 4 4 5 5 8 8 6 6 7 .7 Adjusting Wheel TVM-3077 and TVM-5130 REF. NO. 1 2 3 4 5 6 7 8 PART NO. QTY 50038250 50037669 44539 50037665 50037664 20496 50022365 50022409 50022408 449 1 1 1 1 1 1 1 1 1 1 DESCRIPTION Wheel Pivot Arm Weldment Left Hand Wheel Pivot Arm Weldment Right Hand Hex Nut 1/2” CP Nylock Wheel Brace Left Hand Wheel Brace Right Hand HHCS 1/2” x 5-1/2” G5 ZP Wheel 8” x 2” x .
2 3 Front 4 1 5 Cutting Unit Number Sequence 14 (Note: Items 4 & 5 do not apply to TVM-3077 models) 16 15 18 45 41 44 43 30 36 15 16 16 4 11 14 15 7 31 39 17 40 27 6 42 5 2 15 31 25 10 38 23 32 52 34 1 7 51 20 29 3 23 37 46 33 9 8 13 2 24 27 35 12 1 50 49 47 21 48 6-4 21 22 19
Cutter Head TVM-3077 & TVM-5130 (with standard .063” thick blades) REF. NO. PART NO.
50022425 Decal Kit 50022436 Decal Kit TVM-5130 TVM-3077 PART NO. 50022064 50022065 50022066 50022067 50022070 50022071 50022072 50022074 50022075 50022076 50022077 50022079 50022081 50022303 32767 32768 50100034 500033 QTY 1 1 2 2 1 1 1 1 10 4 10 1 1 4 4 4 1 1 DESCRIPTION PART NO.
DANGER WARNING ARNING NOTICE EXCESSIVE POINT ORSPEED HAZARD G HAZARD THROWN OBJECT HAZARD To prevent serious injury or death from thrown objects: To prevent damage to reel units and / or uneven cutting: To Prevent Serious Injury or Death: injury20 ormph death Do NotsExceed maximum crushing: transport speed. Loss of vehicle implement while control and/or machine damage can result Raising Keep frame level 50022081 Lowering Operate with all guards installed in good condition.
Notes
Notes
Locke Turf 307 Highway 52E, Opp, Alabama 36467, (334) 493-1300
