Instructions / Assembly

Installation & Assembly Instructions
Please contact our Customer Service Division with any questions at:
30700 D Carter Street ∙ Solon, OH 44139 ∙ (P) 440.248.5480 ∙ [e-mail]
For a full line of products visit www.tritonproducts.com 1 INSSLB2802
Read all instructions completely before installing. Should you have any questions about your installation, please call
Customer Service at 440-248-5480
 Boards can be positioned side by side or in separate locations in vertical or horizontal mounting positions.
 LocBoards fasten directly to concrete, solid wood and hollow wall structures without the use of furring strips.
 LocBoards are designed with internal mounting flanges that keep mounting hardware hidden from sight and adds to
the board’s structural integrity and holding power.
 If installing to bare studs you will need to install wood headers before completing installation.
 Mounting hardware is included to complete your installation.
Report Any Missing Parts and/or Damaged Goods within 5 Days from Receipt
QTY Description
(3) 1" Single Rod 30 Degree Stainless LH
(6) 3" Single Rod 30 Degree Stainless LH
(3) 6" Single Rod 90 Degree Stainless LH
(3) 4" Double Rod 90 Degree Stainless LH
(3) ¾”-1 ¼” SS LH Ext Spring Clip
(3) 1"-2" SS LH Ext Spring Clip
(3) 1/4"-1/2" SS LH Stanard Spring Clip
(3) 2-1/4"L Curved SS LocHook
(1) 8-1/8” SS LH Multi-Prong Holder
(1) 9" SS LH Multi-Ring Tool Holder
(2) 18” x 36” Stainless Steel LocBoards
(3) SS BinClips for LocBoard
(3) Black Bins
(12) Each #8- 2” Stainless Steel Screws and #8 plastic wall anchors.
Tools needed for Installation
Level, Marker, 7/32” standard or Masonry Drill bit, 7/64” Std. Bit for wood studs, #2 Phillips Head Screw Driver, and a
power drill.
LocBoard Installation:
For Drywall, Hollow Concrete Wall installation: Use (12 each) plastic drywall anchors and #8 Phillips head stainless
steel screws (SUPPLIED WITH THIS SYSTEM). If installing to bare studs you will need to install wood headers before
completing installation using wood screws only. NOTE: Always install 1 board at a time.
1. Select wall location for your LocBoards and the desired vertical or horizontal mounting pattern you wish to mount in.
When selecting a location for mounting always make sure that mounting locations do not fall in line with, are adjacent
to, or interfere with any internal or external electrical wiring, wall mounted or built-in electrical appliances, heaters,
gas lines, ductwork or plumbing inside of wall, or are located on the opposite side of any wall surface from where you
are mounting. If you are unsure, please consult a professional before proceeding with installation.
2. (Using Images on Back) There are three screw holes in each mounting flange on the back of your LocBoard that are
accessible through the square holes on the front.
3. Place 1 LocBoard with mounting flanges flat against wall surface. While using a level to make sure your board is straight
and squared, looking through the square holes on the front of the board, mark the centers of all 6 screw holes onto
your wall surface. Note: Installation for first board should be completed before marking mounting holes for the second
board.
LB18-SKit - (2) 18” x 36” Stainless Steel LocBoard®(s)