B348982344COM0 Date of Purchase ___ / ___ / ___ Lot Number:
8982344COM All-In-One Closet Keep this Assembly Manual for future reference. Las traducciones en español se encuentran al final de este manual. Vous trouverez les traductions en français à la fin de ce manuel. Two adults recommended for assembly Secure Your Furniture Keep your home and family safe with the wall anchor kit that is included with the product. For missing or broken parts - Visit littleseedskids.com - Call 1-800-489-3351 Serious or fatal crushing injuries can occur from tipping furniture.
Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Monday-Friday 9am - 5pm CST Visit littleseedskids.com to view the limited warranty valid in the U.S. and Canada.
Before You Start P P P P P Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
Board Identification A C B D Upper Left End Panel Upper Right End Panel Lower Left End Panel Lower Right End Panel 36860344030 36860344040 36860344010 36860344020 E x2 Divider 36860344050 I Upper Fixed Shelf 36860344090 littleseedskids.
Board Identification DWR SIDE DWR SIDE x2 Drawer Side 39991140346200C DWR BACK Drawer Back 39991140051340B R Q Bottom 36860344170 Shoe Shelf 36860344180 U DWR BTM Drawer Bottom 39991340052310D S Shoe Apron 36860344191 V T Shoe Side 36860344200 littleseedskids.
Board Identification These pieces are paper board construction. They ares not made from wood but are required for the assembly of your unit. G U F B H A I K V T S F J E R D J C E Q F littleseedskids.
Parts List Actual Size 2 1 x4 #A80250 Shelf Support 5 x24 #A22620 Cam Lock x24 #A22610 Cam Bolt 7 x26 #A12120 7/16" Pan Head 10 x9 #A53510 Angle Bracket 8 6 x32 #A21660 Wood Dowel 4 3 9 x10 #A11080 7/16" Flat head 12 x10 #A20940 Wall Anchor 13 x10 #A12700 7/8" Pan Head 14 17 11 x4 #A21970 Drive Fastener x49 #A21110 Nail littleseedskids.
Parts List Not Actual Size 15c 15a 15d 16 15b 15 X1 #A84050 Wall Anchor Kit 18a Left Cabinet Member X2 #A54510 Drawer Bracket Right Cabinet Member 18c 18b Left Drawer Runner Right Drawer Runner 18d 18 x1 #A56770 Drawer Slide Package 21 20 19 X5 #I20630 Telescoping Tube littleseedskids.
Step 1 15a 4 6 (3) #A53510 15b (x6) #A12120 (x1) #A84050 Assemble the apron (F) and the top (G) using the angle brackets. Attach the wall anchor kit as shown below. 6 * Raw Edges are Shaded. G F 4 1st 15b G 2nd 15a F littleseedskids.
Step 2 3 5 (x4) #A22610 (x4) #A21660 Insert two wood dowels and two cam bolts into upper left end panel (A) & upper right end panel (B). 3 A & B 5 littleseedskids.
Step 3 2 (x4) #A22620 Quick Assembly 5 Tip (x4) #A21660 Proper orientation of CAM LOCK Insert four wood dowels and four cam locks into upper fixed shelf (I). 5 2 2 I 5 littleseedskids.
Step 4 6 4 3 (x4) #A22610 (x3) #A53510 (x6) #A12120 Assemble angle brackets and insert four cam bolts as shown below. 6 4 F K 3 littleseedskids.
Step 5 UNLOCK Attach the upper left end panel (A) & upper right end panel (B) to the upper fixed shelf (I) using the cam system. * Raw Edges are Shaded. B I A littleseedskids.
Step 6 12 (x8) #A23030 Attach the top (G) and the center shelf (K) to the upper left end panel (A) & upper right end panel (B) using eight screws. 12 * Raw Edges are Shaded. G B I A K 12 littleseedskids.
Step 7 7 18b (x1) #A56770 (x3) #A11080 Attach the right drawer slide to the lower right end panel (D) as shown below. * Raw Edges are Shaded. 7 D 18b finished edge littleseedskids.
Step 8 3 2 (x2) #A22620 5 (x6) #A22610 (x2) #A21660 Insert six cam bolts, two cam locks, and two wood dowels into the lower right end panel (D). * Raw Edges are Shaded. Quick Assembly Tip D Proper orientation of CAM LOCK 2 3 5 littleseedskids.
Step 9 7 18a (x1) #A56770 (x3) #A11080 Attach the left drawer slide to the lower left end panel (C) as shown below. * Raw Edges are Shaded. 7 C 18a finished edge littleseedskids.
Step 10 5 3 2 (x2) #A22620 (x6) #A22610 (x2) #A21660 Insert six cam bolts, two cam locks, and two wood dowels into the lower left end panel (C). Quick Assembly Tip C Proper orientation of CAM LOCK 2 3 * Raw Edges are Shaded. 5 littleseedskids.
Step 11 Quick Assembly 5 2 Tip (x8) #A22620 (x8) #A21660 Proper orientation of CAM LOCK Insert four wood dowels and four cam locks into lower fixed shelf (J). 2 5 J (x2) 5 littleseedskids.
Step 12 5 (x4) #A21660 Insert two wood dowels into large holes in divider part (E). E (x2) 5 littleseedskids.
Step 13 2 (x4) #A22620 6 5 4 (x3) #A53510 (x4) #A21660 (x6) #A12120 Assemble angle brackets and insert cam locks and wood dowels as shown below. Quick Assembly Tip 6 Proper orientation of CAM LOCK 4 5 F Q 2 5 2 * Raw Edges are Shaded. littleseedskids.
Step 14 12 (x2) #A23030 Attach the bottom (Q) to the divider (E) using two screws. E Q 12 littleseedskids.
Step 15 12 (x2) #A23030 First, attach the lower fixed shelf (J) to the divider (E) using two screws. Then align the dowels to fit the divider (E) and the second lower fixed shelf (J) together. J E J 12 littleseedskids.
Step 16 Fit the dowels in divider (E) into the holes In the lower fixed shelf (J). J E E J Q littleseedskids.
Step 17 UNLOCK LOCK Attach the lower left end panel (C) and the lower right end panel (D) to the assembly from the previous step using the cam lock system as shown. J D E J Q C littleseedskids.
Step 18 LOCK UNLOCK Assemble the upper and lower portion of the unit using the cam lock system as shown. G B A I K J E J D E C littleseedskids.
Step 19 11 (x49) #A21110 2 people are required for this step. Carefully turn the unit over onto its front side as shown. Assure that the unit is square. Distance from corner to corner must be equal as shown. * Raw Faces are Shaded. U 1st 11 V B 2nd D Q Align the upper back panel with the top of the unit. Align the side edges with the edge of the left upper end panel (A) and right upper end panel (B) and nail straight into the back edges as shown.
Step 20 Quick 5 2 (x4) #A22620 Assembly Tip (x4) #A21660 Proper orientation of CAM LOCK Insert two wood dowels and two cam bolts into shoe shelf (R). 5 R 2 5 littleseedskids.
Step 21 3 (x2) #A22610 Insert two cam bolts into shoe side (T). 3 T littleseedskids.
Step 22 14 (x3) #A13410 Attach the shoe apron (S) to the shoe shelf (R) using three screws. (You may need assistance with this step.) R S 14 littleseedskids.
Step 23 S NOTE: For this step, the shoe side part (T) can be placed on the left or the right side of the shoe shelf (R). If you place part (T) on the left, the shoe rack will go on the left side of the unit. If you place part (T) on the right, the shoe rack will go on the right side of the unit. * Raw Edges are Shaded. R UNLOCK LOCK T littleseedskids.
Step 24 3 (x2) #A22610 If your shoe rack is being assembled on the left side of the unit, place (2) #A22510 cam bolts in the lower left end panel (C) as shown below. If your shoe rack is being assembled on the right side of the unit, place (2) #A22510 cam bolts in the lower right end panel (D) as shown below. Left Side Right Side 3 littleseedskids.
Step 25 UNLOCK LOCK The shoe rack is shown on the right side of the unit. However, the same process will be performed if the shoe rack is placed on the left side of the unit. D S R T littleseedskids.
Step 26 6 16 (x4) #A12120 (x2) #A54510 Line up the drawer bracket stem with holes in drawer side as shown. From other side, insert screws into drawer bracket stem and tighten. Note that one drawer side will have the drawer bracket on the left end and the other on the right end. 16 DWR SIDE DWR SIDE 16 6 6 6 6 littleseedskids.
Step 27 6 (x4) #A12120 Attach the drawer front using four screws as shown below. Be sure the groove in the drawer sides are centered with the groove in the drawer front. 6 DWR SIDE DWR SIDE littleseedskids.
Step 28 10 (x4) #A21970 Attach the drawer back using four drive fasteners as shown below. DWR BACK 10 DWR SIDE DWR BTM finished surface DWR SIDE littleseedskids.
Step 29 7 18c 17 (x4) #A11080 (x1 each) #A56770 (x2) #A17300 20 18d Attach the drawer slides to the bottom of the drawer sides. Attach the handle to drawer front using two bolts. (x1) #A52575 7 17 DWR SIDE DWR BACK 18d L DWR BTM DWR SIDE 20 18c 7 littleseedskids.
Step 30 8 (x10) #A20940 13 (x10) #A13020 9 (x10) #A12700 19 (x5) #I20630 First, locate your closet rods where you would like to position them in-line with the holes in the unit and mark hole locations on the wall. Next, If you are using the anchors to fasten the closet rods, insert them into the wall securely by screwing them into the wall using a screwdriver. Second, use the #A12700 screw to attach your closet rods to your unit as shown on the left side of the unit.
Step 31 Notice, the drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. cabinet member roller 21 21 drawer runner (x4) #A91590 littleseedskids.
Step 32 (x4) #A80250 1 Place the shelf spoons into the holes in thier desired position and place adjustable shelf (H) in place as shown. 1 H littleseedskids.
Step 33 15c 15d (x1) #A84050 IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT. WARNING Serious or fatal crushing injuries can occur from furniture tipover.
MAXIMUM LOADS This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 50 Lbs. each 22.7 kg each 40 Lbs. 18.2 kg 50 Lbs. each 22.7 kg each 40 Lbs. 18.2 kg 10 Lbs. 4.6 kg. 20 Lbs. 9.1 kg Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual. 2.
Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit littleseedskids.
Español Consejos Útiles (página 3) - Abra su artículo en el área donde usted planea utilizarlo para evitar levantar y moverlo menos - Identificar, ordenar y contar las piezas antes de intentar ensamblar - Las clavijas de compresión se golpean con un martillo - Las diapositivas están marcadas con una R (derecha) y L (izquierda) para la colocación correcta - Asegúrese de que siempre este el punto locaizado en la parte superior de bloqueador de leva este volteadohacia borde exterior - Utilizar todos los clavo
Español Paso 3 Inserte cuatro espigas de madera y cuatro candados de leva en el soporte fijo superior (I). Paso 4 Monte las escuadras de ángulo e inserte cuatro pernos de leva como se muestra abajo. Paso 5 Conecte el extremo superior izquierdo panel (A) y panel del extremo derecho superior (B) a la estante (I) mediante el sistema de levas fijo superior.
Español Paso 14 Una la parte inferior (Q) con el separador (E) utilizando dos tornillos. Paso 15 Sujete primero el soporte fijo inferior (J) con el separador (E) utilizando dos tornillos. Alinee después las espigas para encajar conjuntamente el separador (E) y el segundo soporte fijo inferior (J). Paso 16 Encaje las espigas en el separador (E) colocándolas en los agujeros del soporte fijo inferior (J).
Español Paso 20 Inserte dos espigas de madera y dos pernos de leva en el soporte de zapatos (R). Paso 21 Inserte dos pernos de leva en el lado de los zapatos (T). Paso 22 Sujete el tablero (S) con el soporte de zapatos (R) utilizando tres tornillos. (Es posible que necesite ayuda para este paso). Paso 23 NOTA: Para este paso, la parte lateral de los zapatos (T) puede colocarse en el lado izquierdo o en el derecho del propio soporte de zapatos (R).
Español Paso 27 Sujete el frontal del cajón utilizando cuatro tornillos, tal y como se muestra abajo. Paso 28 Fije la parte posterior del cajón usando cuatro sujetadores de la unidad como se muestra abajo. Paso 29 Fije las correderas del cajón a la parte inferior de los lados del cajón. Fije la manija al frente del cajón con dos pernos. Paso 30 En primer lugar, ubique las varillas de su clóset en el lugar donde desee colocarlas en línea con los agujeros de unidad y marque puntos de agujeros en la pared.
Español Paso 33 15c (x1) #A84050 15d Para mampostería, hormigón u otros materiales de la pared: Consulte a su ferretería local para los anclajes apropiados para fijar firmemente el soporte de seguridad. IMPORTANTE: ESTA UNIDAD DEBE SER ASEGURADA CON LA PARED PARA PREVENIR VOLQUEO. SIGA ESTAS INSTRUCCIONES PARA INSTALAR EL SOPORTE DE SEGURIDAD ANTIVOLQUEO SUMINISTRADO CON ESTE PRODUCTO.
Español Página 43 CARGA MAXIMA Esta unidad ha sido diseñada para soportar la carga máxima anotada. El exceder estos límites puede causar inestabilidad, colapsarse y/o causar serias lesiones. ADVERTENCIA: Riesgo de lesiones a las personas - no coloque un televisor sobre muebles. Este mueble no está aprobado para su uso con un televisor. Certificado de Conformidad 1. Este certificado se aplica al producto de Dorel Home Furnishings, Inc. identificado por este manual de instrucciones. 2.
Français Astuces Utiles (page 3) -Ouvrez votre article dans la zone que vous prévoyez de le garder pour moins de levage lourd -Identifier, trier et compter les pièces avant d'essayer d'assembler -Les goujons de compression sont taraudés avec un Marteau -Les glissières sont marquées d'un R (droit) et d'un L (gauche) pour un bon placement -Assurez-vous toujours de faire face la pointe situé sur le haut de la Serrure de Came vers le bord extérieur -Utiliser tous les clous fournis pour le panneau arrière et le
Français Étape 4 Assembler des équerres à fixation et insérer quatre serrures à came tel que démontré plus bas. Étape 5 Fixez l'extrémité gauche supérieure panneau (A) & panneau d'extrémité droite supérieure (B) pour la haute tablette (I) en utilisant le système de came fixe. Étape 6 Fixer la partie supérieure (G) et l'étagère centrale (K) à l'extrémité gauche supérieure panneau (A) & panneau d'extrémité droite supérieure (B) à l'aide de huit vis.
Français Étape 14 Attacher le bas (L) à la cloison (E) en utilisant deux vis. Étape 15 Premièrement, attacher la tablette fixée inférieure (J) à la cloison (E) en utilisant deux vis. Puis aligner les goujons pour fixer la cloison (E) et la seconde tablette fixée inférieure (J) ensemble. Étape 16 Fixer les goujons qui sont dans la cloison (E) dans les trous de la tablette fixée inférieure (J).
Français Étape 20 Insérer deux goujons en bois et deux serrures à came dans la tablette à souliers (R). Étape 21 Insérer deux serrures à came dans le côté du soulier (T). Étape 22 Attacher le tablier (S) à la tablette à souliers (R) en utilisant trois vis. (Vous aurez peut-être besoin d'aide pour cette étape.) Étape 23 NOTE : Pour cette étape, la pièce du côté du soulier (T) peut être placée sur le côté gauche ou droit de la tablette à souliers (R).
Français Étape 28 Fixez le dos du tiroir à l'aide de quatre attaches d'entraînement comme indiqué ci-dessous. Étape 29 Fixez les glissières du tiroir au bas des côtés du tiroir. Fixez la poignée à l’avant du tiroir à l’aide de deux boulons. Étape 30 Premièrement, placer vos barres de garde-robe où vous voulez les positionner, enligner avec les trous dans l'assemblage et marquer l'emplacement des trous sur le mur.
Français Étape 33 Pour la maçonnerie, béton ou d'autres matériaux de mur: 15c Consultez votre magasin local de matériel pour les ancrages 15d (x1) appropriés pour fixer le support de #A84050 sécurité. IMPORTANT: CET APPAREIL DOIT ÊTRE FIXÉ AU MUR POUR AIDER À PRÉVENIR LE BASCULEMENT. SUIVRE CES INSTRUCTIONS POUR INSTALLER LE SUPPORT DE SÉCURITÉ ANTI-BASCULEMENT FOURNI AVEC CE PRODUIT. trou ATTENTION Blessures par écrasement graves ou mortelles peuvent se produire par le renversement des meubles.
Page 43 CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées. En excédant ces limites de charge, le meuble pourrait devenir instable, s'effondrer, et/ou causer des blessures graves. AVERTISSEMENT : Risque de blessure corporelle - ne pas placer une télévision sur ce meuble. Ce meuble n'est pas approuvé pour une utilisation avec une télévision. Certificat de Conformité 1. Ce certificat s'applique au produit Dorel Home Furnishings, Inc.