Use and Care Manual

(Optional)

Padded V-Rung & Cable Hooks

Fly Section

Rail Closures

Do Not Stand

on or above Red Rungs

Round Rungs

Rung Lock Assembly -

Rung Lock, Flipper & Spring

Base Section

Internal Guide Bracket

Shoe Bracket

Rail Closures

Spike Shoe

External Guide

Bracket or

J-Bracket

D-Rung - Top Three Standing Rungs

Rung Braces (IAA only)

Rope Assembly, Side-Mounted

Double-Pulley System

SCAN THE CODE TO VIEW

INSTRUCTION & SAFETY VIDEO

Thank you for purchasing the Lunar by Little Giant. The Lunar is the lightest fiberglass extension ladder

in the world. Little Giant Ladder Systems subjects each ladder to comprehensive tests for safety in design

and construction, so you can trust it in all the work you do. In addition, the Lunar meets or exceeds all

OSHA and ANSI safety standards.

Please don’t ignore the instructions! Make the most of your ladder by learning how to use it safely. If you

have any questions about how to operate your Lunar please call us. We value our customers, and we’re

happy to help.

USER INSTRUCTIONS

TYPE IA 300 LBS AND TYPE IAA 375 LBS RATED

Little Giant Ladder Systems

1198 N. Spring Creek Place

Springville, UT 84663

Customer Service

800-453-1192

PAGE 1
USER INSTRUCTIONS Thank you for purchasing the Lunar by Little Giant. The Lunar is the lightest fiberglass extension ladder in the world. Little Giant Ladder Systems subjects each ladder to comprehensive tests for safety in design and construction, so you can trust it in all the work you do. In addition, the Lunar meets or exceeds all OSHA and ANSI safety standards. Please don’t ignore the instructions! Make the most of your ladder by learning how to use it safely.
PAGE 2
DO: Inspect the ladder before use, do not use a broken ladder. If your ladder is broken, remove it from service and destroy it. Use the correct size of ladder for the job. Read all instructions on the ladder before using it. Get to know your ladder. Securely engage rung locks before climbing. 75.5° Use the proper 75.5-degree working angle, the distance from the ladder’s base to the base of the support wall must be 1/4 the working length of the ladder; i.e.
PAGE 3
GENERAL OPERATING SAFETY TIPS PROPER SELECTION 1. Select ladder of proper size to reach working height. 2. IMPORTANT: Ladders are designed to support one person plus materials and tools, not more than the working load on the notice label on this ladder. INSPECTION 1. Inspect upon receipt and before each use; never climb a damaged, bent or broken ladder. All parts must be in good working order. 2.