Data Sheet

12
Toll Free: 877-250-7729 www.Litter-Robot.com
 The Globe will rotate past the Home position to level the
litter before finally returning to the Home position. The
yellow light turns off and the blue standby light turns on.
If your cat re-enters the Globe during the Wait Time
countdown (red light is on), the Cat Sensor detects that
weight and will not cycle with your cat inside (see page 30).
Once your cat exits, a new countdown will begin.
Empty Cycle
The Empty cycle allows you to empty all of the litter from the
Globe into the Waste Drawer for easy disposal. Use this cycle
to change out the whole bed of litter or before cleaning the
Globe (see page 27).
Press the Empty button to start an Empty cycle.
During an Empty cycle, press any button to pause the cycle.
Press the Cycle button to resume the cycle. Press the Reset
or Empty button to abort the cycle and return the Globe to
the Home position.
How it works:
 The Globe rotates clockwise. The yellow light on the
Control Panel will be on while cycling.
 As the Globe rotates, the litter will fall through the Waste
Port into the Waste Drawer.
 After the litter is emptied, the Globe will stop with the
yellow light on and await your action.
 (You may need to sweep any remaining litter toward the
Waste Port.)
 Press any button to return the Globe to the Home
position.