Data Sheet

35
Toll Free: 877-250-7729 www.Litter-Robot.com
What happens if the Globe jams?
If the Globe jams or an excessive load condition
occurs, the motor is turned off automatically. In
addition, the Litter-Robot is equipped with an Anti-
Pinch Safety Feature (see page 30).
Does the Litter-Robot require special litter?
No, the Litter-Robot simply requires clumping litter.
We recommend a high quality, clay-based clumping
litter. Some silica gel litter beads and crystals can
also be used with the Litter Robot, as long as they
pass through the screen.
Litters that do not work in the Litter-Robot are the
strictly absorbent, non-clumping or loose-clumping
litters, newspaper-based litters and absorbent wood
pellet litter.
Does the Litter-Robot work with Feline Pine?
No, Feline Pine pellets are too large to pass through
the sifting screen, which prevents the litter sifting
system from working properly. Feline Pine clumping
is also too fluffy to effectively pass through the sifting
screen.
How much litter do I put in the Litter-Robot?
Fill the Globe with approximately 8-10 pounds of
litter, until it meets the raised Fill Line on the black
rubber Globe liner when spread flat. If there is too
much litter in the Globe, it will be expelled into the
Waste Drawer during the first few cycles. Since the
waste clumps are removed during each cycle, there is
no need to put excessive litter in the Globe.