Manual

8
Toll Free: 877-250-7729 www.Litter-Robot.com
enough to pass through the screen will also work (periodic
changing of this type of litter is required).
DO NOT use litters that are the strictly absorbent, non-
clumping, loose-clumping, newspaper-based, or wood-based
pellets.
If you are using a litter alternative not listed here, please
contact us at [e-mail] to make sure you are
using a compatible litter.
Tip
When filling the Litter-Robot for the first time, it is best
to continue using the brand of litter you were using
previously—as long as it is a clumping type of litter. Your cat
will need to adjust to the new litter box, and introducing a
new litter at the same time may increase its anxiety.
However, if you are currently using a non-clumping litter, you
will need to switch to a clumping type.
Power and Initial Clean Cycle
Plug the small end of the Power Supply into the socket at the
back of the Base. Then plug the AC/DC adapter into a wall
outlet.
Locate and press the Power button. The Litter-Robot will
perform an initial Clean cycle that will last about 2 ½
minutes. Learn more about the Clean cycle on page 11.
Your Litter-Robot is now ready to use; however, we
recommend powering the unit off until your cat/s become
familiar with and begin using the Litter-Robot.