Manual

conditions such as a basement room without any windows. A

light sensor located below and to the left of the Power Button

turns the Night Light On and Off automatically. The Night Light

function can be turned On and Off by pressing and holding the

Power Button (see Control Panel - Buttons section -> Power

Button, page 11).

Bonnet

The Bonnet functions as a cover

and guard for the waste port as

the Globe (and waste port) rotate

from the top of the unit into the

Base. The Bonnet also provides a

mount location for the Automatic

Night Light, wires, and electrical

terminals that provide a low and

safe 5VDC to the Night Light. The

Globe will not rotate without the

Bonnet installed (see Control Panel

- Indicator Lights section -> Yellow

LED Flashing, page 15). The Bonnet is assembled to the Base

by inserting the tabs at the bottom and rear of the Bonnet into

the small holes in the Base, and rotating the Bonnet downward

such that the snaps located at the

bottom and front of the Bonnet are

inserted into the matching slots and

latched. Holes above the snaps

provide a convenient finger hold

while removing or installing the

Bonnet. (See page 25-27 for bonnet

assembly instructions.)

Underside of Bonnet

showing Night Light

Bonnet

Toll Free: 877-250-7729 www.Litter-Robot.com