Installation Guide

7
ASSEMBLY INSTRUCTIONS
9
10
A
F
Glass Shade
(representative
only)
9.
10.
8.
Align holes in fixture (A) with screws (C) in
mounting plate (B) and push fixture (A) toward
wall. Attach fixture (A) to mounting plate (B)
using the decorative nuts (E) previously
removed (Step 3, page 5).
Note: Fixture (A) can be installed with the
sockets facing either up or down.
A
Bulb
8
E
E
A
B
C
Outlet
Box
Install standard-base bulb(s) (not included). Use
60-watt max. incandescent bulb(s) or CFL/LED
equivalent.
WARNING: When replacing bulb(s), please
allow bulb(s) and fixture to cool down before
touching.
Restore power and test fixture (A).
If light(s) do/does not function, please refer to
TROUBLESHOOTING on the following page.
Remove socket ring (F) from socket of fixture (A).
Attach glass shade (sold separately) to socket,
securing with socket ring (F).
If fixture (A) has additional sockets, repeat Step 9.
CAUTION: Do not overtighten socket ring(s)
(F) as glass may crack or break.