Installation Guide

ASSEMBLY INSTRUCTIONS

Outlet Box

Wrap electrical tape (not included) around each

individual wire connector (AA) down to the wire.

Push wire connectors (AA) gently back into outlet

box. Carefully push excess wiring into outlet box.

WARNING: Make sure no bare wire or wire

strands are visible after making connections.

Unwrap BARE wire on fixture (A) from BLACK and

WHITE wires. Prepare fixture wires by stripping 3/4

in. of insulation from wire ends using wire strippers

(not included). Connect WHITE wire from fixture (A)

to WHITE wire from outlet box using existing wire

connector or wire connector (AA). Connect BLACK

wire from fixture (A) to BLACK wire from outlet box

using existing wire connector or wire connector (AA).

Connect BARE/GREEN ground wire from outlet box

to BARE ground wire from fixture (A) with wire

connector (AA).

NOTE: Screw wire connectors (AA) on in a clockwise

direction.

WARNING: Never connect BARE/GREEN

ground wire to WHITE or BLACK power supply wires.

WARNING: To reduce the risk of fire, electrical

shock or personal injury, wire connectors (AA) are

designed to accept only one 12-gauge house wire

and two lead wires from the light fixture. If your house

wire is larger than 12-gauge or there is more than

one house wire to connect to the corresponding

fixture lead wires, consult an electrician for the proper

size wire connectors to use.

x 3

Hardware Used

Wire Connector

Outlet

Box

WHITE

BLACK

BARE/

GREEN