Installation Sheet

ManualsBrandsLite Source ManualsChandeliersLite Source Stacia 9 Light 26" Wide LED Abstract Globe Chandelier

ITEM NO.: LS-19856

ASSEMBLY INSTRUCTIONS:

VERY IMPORTANT

PLEASE READ THOROUGHLY. MAKE SURE YOU PROPERLY ALIGN POLES BEFORE

SCREWING THEM TOGETHER TO AVOID DAMAGING CONNECTION THREADS. NOT

ADHERING TO THIS PROCEDURE MAY VOID YOUR WARRANTY.

WARNING: MAKE SURE POWER SUPPLY IS TURNED OFF AT MAIN BREAKER PRIOR TO INSTALLATION.

PLEASE READ THOROUGHLY. CAREFULLY UNPACK THIS LAMP AND PLACE ON A SOFT FLAT

SURFACE.

1.There are 4pcs of poles (B, C, D) with different length (16”Lx2pcs + 10”L x1pc + 6”L x1pc).

Before you install the lamp, please choose the pole length to determine height for your lamp.

Then feed the cord through the poles (B, C, D), canopy. All poles (B, C, D) may not be used

based on ceiling height.

2.Connect the poles (B, C, D) together and screw the

another side of pole onto the fixture body (A).

3.Fasten the crossbar (O) to the ceiling outlet box with

Outlet box screw (P).

4.Connect the NEUTRAL wire silver(K) from fixture to black wire

(K) (NEUTRAL) from driver output using wire connector(M).

Connect the LIVE wire silver(S) marked words from fixture to the

RED wire(S)(LIVE) from driver output using wire connector(M).

5.Connect the NEUTRAL wire (N,white) from driver input to the NEUTRAL

wire (N) from power supply using wire connector(M).

Connect the LIVE wire (L,black) from driver input to the LIVE

wire(L) from power supply using wire connector(M).

6.Connect the GROUND wire (H) from canopy of fixture to the ground

wire (G) from ceiling outlet box， using the wire connector (M) (Or

attach them to the crossbar (O) with the green Ground screw (I)).

NOTE: Never connect the ground wire to live or neutral power

supply wire. If outlet box does not have ground wire,

please connect the ground wire from fixture to crossbar.

7.Attach the canopy (E) to the crossbar (O) and secure

with finial (R).

8. Install bulbs into the sockets.

9.Relamping: Make sure turn off the fixture before

replacing bulbs. Insert bulbs to the socket of fixture.

(Maximum) G4 LED BULB.

(LED BULB included)

※ PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF ANY PARTS SHORTAGE.

※ SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Use 9 PCS 3W

BULB G4,12V,LED,

3W,9 PCS

(M)WIRE CONNECTORS(5PCS)

(O)CROSSBAR

(P)

8-32x

"OUTLET

BOX SCREW(2PCS)

(E)CANOPY

(R)FINIAL(2PCS)

(N)SUPPLY WIRE(NEUTRAL)

(Q)

8-32x2

"SCREW(2PCS)

(G)SUPPLY GROUND WIRE

(I)GROUND SCREW

(A)FIXTURE BODY

(D)POLE 1/2"x16"(2PCS)

(C)POLE 1/2"x10"(1PC)

(B)POLE 1/2"x6"(1PC)

(K)FIXTURE WIRE(NEUTRAL)

(U)DRIVER

(N)DRIVER INPUT WIRE(NEUTRAL)

(L)SUPPLY

WIRE(LIVE)

(H)FIXTURE GROUND WIRE

(S)FIXTURE WIRE(LIVE)

(L)DRIVER

INPUT WIRE(LIVE)

Summary of content (1 pages)

PAGE 1
ITEM NO.: LS-19856 ASSEMBLY INSTRUCTIONS: VERY IMPORTANT PLEASE READ THOROUGHLY. MAKE SURE YOU PROPERLY ALIGN POLES BEFORE SCREWING THEM TOGETHER TO AVOID DAMAGING CONNECTION THREADS. NOT ADHERING TO THIS PROCEDURE MAY VOID YOUR WARRANTY. WARNING: MAKE SURE POWER SUPPLY IS TURNED OFF AT MAIN BREAKER PRIOR TO INSTALLATION. PLEASE READ THOROUGHLY. CAREFULLY UNPACK THIS LAMP AND PLACE ON A SOFT FLAT SURFACE. 1.There are 4pcs of poles (B, C, D) wit h different length (16 ”Lx2pcs + 10”L x1pc + 6”L x1pc).