User's Manual

14
Operating your train set
Coupling
W
hen coupling your cars, at least one of the mating couplers must be open as shown at the left
in Figure 6. Press down on the lock release to open the coupler, then push the cars toward
each other until they lock together.
Keep in mind that it’s easier to couple cars on a straight section of track.
Lock release
Figure 6. Coupler operation
Note!
Operating the Remote-Control Track section
T
o uncouple or activate your rolling stock, position the trigger disc over the magnet in the center of
the track. Press UNCOUPLE on the controller, and the magnet will pull the trigger disc downward,
releasing the coupler or activating the car. Refer to Figure 7.
Trigger disc
Magnetic Uncoupling track
(6-12020)
Figure 7. Uncoupling your rolling stock