® A Division of Cisco Systems, Inc. Dual-Band 5GHz + Dual-Band 2.4 GHz Wireless A+G 802.11a 802.11g Access Point WIRELESS Model No. WAP55AG ver.
Dual-Band Wireless A + G Access Point Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2005 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
Dual-Band Wireless A + G Access Point Table of Contents Chapter 1: Introduction 1 Welcome What’s in this Guide? 1 2 Chapter 2: Planning your Wireless Network Network Topology Roaming Network Layout Chapter 3: Getting to Know the Dual-Band Wireless A + G Access Point The Back Panel The Front Panel Chapter 4: Connecting the Dual-Band Wireless A + G Access Point Hardware Installation Chapter 5: Setting Up the Dual-Band Wireless A + G Access Point Setup Wizard Chapter 6: Configuring the Dual-Band Wirel
Dual-Band Wireless A + G Access Point Appendix B: Wireless Security Security Precautions Security Threats Facing Wireless Networks Appendix C: Upgrading Firmware Appendix D: Windows Help Appendix E: Glossary Appendix F: Specifications Appendix G: Warranty Information Appendix H: Regulatory Information Appendix I: Contact Information 36 36 36 39 40 41 45 46 47 49
Dual-Band Wireless A + G Access Point List of Figures Figure 3-1: The Access Point’s Back Panel Figure 3-2: Front Panel Figure 5-1: The Setup Wizard’s Welcome Screen Figure 5-2: Connect to the Router Figure 5-3: Connect to the Ethernet Port Figure 5-4: Connect to the Power Figure 5-5: Check the LEDs Figure 5-6: Select the Access Point Figure 5-7: Enter the Password Figure 5-8: Basic Settings Figure 5-9: Wireless-A Settings Figure 5-10: Wireless-A Security - WEP Figure 5-11: Wireless-A Security - PSK Figure
Dual-Band Wireless A + G Access Point Figure 6-11: Log Figure 6-12: Factory Defaults Figure 6-13: Firmware Upgrade Figure 6-14: Status - Local Network Figure 6-15: Status - Wireless Network Figure C-1: Upgrade Firmware 28 29 29 30 30 39
Dual-Band Wireless A + G Access Point Chapter 1: Introduction Welcome Thank you for choosing the Dual-Band Wireless A + G Access Point. This Access Point will allow you to network wirelessly better than ever. network: a series of computers or devices connected together 802.
Dual-Band Wireless A + G Access Point What’s in this Guide? This user guide covers the steps for setting up and using the Dual-Band Wireless A + G Access Point. • Chapter 1: Introduction This chapter describes the Dual-Band Wireless A + G Access Point’s applications and this User Guide. • Chapter 2: Planning your Wireless Network This chapter describes the basics of wireless networking.
Dual-Band Wireless A + G Access Point • Appendix G: Warranty Information This appendix supplies the Access Point’s warranty information. • Appendix H: Regulatory Information This appendix supplies the Access Point’s regulatory information. • Appendix I: Contact Information This appendix provides contact information for a variety of Linksys resources, including Technical Support.
Dual-Band Wireless A + G Access Point Chapter 2: Planning your Wireless Network Network Topology A wireless network is a group of computers, each equipped with one wireless adapter. Computers in a wireless network must be configured to share the same radio channel. Several PCs equipped with wireless cards or adapters can communicate with one another to form an ad-hoc network.