® A Division of Cisco Systems, Inc. ADSL Gateway with 4-Port Switch WIRED Model No.
ADSL Gateway with 4-Port Switch Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2004 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
ADSL Gateway with 4-Port Switch Table of Contents Chapter 1: Introduction1 Welcome What’s in this Guide? Chapter 2: Planning your Network The Gateway’s Functions IP Addresses What is a VPN? Why do I need a VPN? Chapter 3: Getting to Know the ADSL Gateway The Back Panel The Front Panel Chapter 4: Connecting the ADSL Gateway Overview Connecting to a Computer 1 2 4 4 4 5 6 8 8 9 10 10 10 Chapter 5: Configuring the ADSL Gateway 12 Overview How to Access the Web-based Utility The Setup Tab The Securit
ADSL Gateway with 4-Port Switch Windows 98 or Me Instructions Windows 2000 or XP Instructions Appendix D: Upgrading Firmware Appendix E: Windows Help Appendix F: Glossary Appendix G: Specifications Appendix H: Warranty Information Appendix I: Regulatory Information Appendix J: Contact Information 62 63 64 65 66 70 71 72 73
ADSL Gateway with 4-Port Switch List of Figures Figure 2-1: A Network with the Gateway Figure 2-2: Computer-to-VPN Gateway Figure 2-3: VPN Gateway-to-VPN Gateway Figure 3-1: Back Panel Figure 3-2: Front Panel Figure 4-1: Connect your network Figure 4-2: Connect your ADSL modem Figure 4-3: Connect power Figure 5-1: Password Screen Figure 5-2: Basic Setup Tab Figure 5-3: Internet Setup - Dynamic IP Figure 5-4: Internet Setup - Static IP Figure 5-5: Internet Setup - RFC 1483 Routed Figure 5-6: Internet Setup
ADSL Gateway with 4-Port Switch Figure 5-23: Applications & Gaming - Port Triggering Figure 5-24: Applications & Gaming - DMZ Figure 5-25: Administration tab - Management Figure 5-26: Administration tab - Reporting Figure 5-27: Adminstration tab - Diagnostics Figure 5-28: Administration tab - Factory Defaults Figure 5-29: Administration tab - Firmware Upgrade Figure 5-30: Status tab - Gateway Figure 5-31: Status tab - Local Network Figure 5-32: DHCP Active IP Table Figure 5-33: Status tab - DSL Connection
ADSL Gateway with 4-Port Switch Figure B-23: New Preshared Key Figure B-24: Tunnel Setting Tab Figure B-25: Connection Type Figure B-26: Rules Figure B-27: Local Computer Figure B-28: VPN Tab Figure C-1: IP Configuration Screen Figure C-2: MAC Address/Adapter Address Figure C-3: MAC Address/Physical Address Figure D-1: Upgrade Firmware 59 59 60 60 60 61 62 62 63 64
ADSL Gateway with 4-Port Switch Chapter 1: Introduction Welcome Thank you for choosing the ADSL Gateway with 4-Port Switch. This Gateway will allow your computers to share a high-speed Internet connection with its built-in modem, as well as share resources, including files and printers, through its built-in Switch. Because the modem, router, and switch are all built-in, creating a network is easier than ever. Put simply, networks are useful tools for sharing computer resources.
ADSL Gateway with 4-Port Switch What’s in this Guide? This user guide covers the steps for setting up and using the ADSL Gateway. • Chapter 1: Introduction This chapter describes the ADSL Gateway and its documentation. • Chapter 2: Planning your Network This chapter describes the basics of networking. • Chapter 3: Getting to Know the ADSL Gateway This chapter describes the physical features of the Gateway.
ADSL Gateway with 4-Port Switch • Appendix G: Specifications This appendix provides the technical specifications for the Gateway. • Appendix H: Warranty Information This appendix supplies the warranty information for the Gateway. • Appendix I: Regulatory Information This appendix supplies the regulatory information regarding the Gateway. • Appendix J: Contact Information This appendix provides contact information for a variety of Linksys resources, including Technical Support.
ADSL Gateway with 4-Port Switch Chapter 2: Planning your Network The Gateway’s Functions A Gateway is a network device that connects two networks together. In this instance, the Gateway connects your Local Area Network (LAN), or the group of computers in your home or office, to the Internet. The Gateway processes and regulates the data that travels between these two networks. The Gateway’s NAT feature protects your network of computers so users on the public, Internet side cannot “see” your computers.
ADSL Gateway with 4-Port Switch Since you use the Gateway to share your DSL Internet connection, contact your ISP to find out if they have assigned a static IP address to your account. If so, you will need that static IP address when configuring the Gateway. You can get that information from your ISP. Dynamic IP Addresses A dynamic IP address is automatically assigned to a device on the network, such as computers and print servers.
ADSL Gateway with 4-Port Switch telecommuters, and/or professionals on the road (travelers can connect to a VPN Gateway using any computer with VPN client software that supports IPSec, such as SSH Sentinel.) There are two basic ways to create a VPN connection: • VPN Gateway to VPN Gateway • Computer (using VPN client software that supports IPSec) to VPN Gateway The VPN Gateway creates a “tunnel” or channel between two endpoints, so that data transmissions between them are secure.
ADSL Gateway with 4-Port Switch data inside of a local network. But what do you do once information is sent outside of your local network, when emails are sent to their destination, or when you have to connect to your company's network when you are out on the road? How is your data protected? That is when a VPN can help. VPNs secure data moving outside of your network as if it were still within that network. When data is sent out across the Internet from your computer, it is always open to attacks.
ADSL Gateway with 4-Port Switch Chapter 3: Getting to Know the ADSL Gateway The Back Panel Figure 3-1: Back Panel The Gateway’s ports, where a network cable and DSL cable are connected, are located on the back panel. The Gateway’s buttons are also located on the back panel. LINE The LINE port connects to the ADSL line. Ethernet (1-4) The Ethernet ports connect to your computer and other network devices. Power The Power port is where you will connect the power adapter.
ADSL Gateway with 4-Port Switch The Front Panel Figure 3-2: Front Panel The Gateway's LEDs, where information about network activity is displayed, are located on the front panel. Power Green. The Power LED lights up when the Gateway is powered on. Ethernet (1-4) Green. The Ethernet LEDs serve two purposes. If an LED is continuously lit, the Gateway is successfully connected to a device through that LAN port. If an LED is blinking, it is an indication of any network activity on that port. DSL Green.
ADSL Gateway with 4-Port Switch Chapter 4: Connecting the ADSL Gateway Overview The Gateway’s setup consists of more than simply plugging hardware together. You will have to configure your hardware: the physical aspect of computers, networked computers to accept the IP addresses that the Gateway assigns them (if applicable), and you will also telecommunications, and other information technology devices have to configure the Gateway with setting(s) provided by your Internet Service Provider (ISP).
ADSL Gateway with 4-Port Switch 5. Connect the power adapter to the Gateway’s Power port, and then plug the power adapter into a power outlet. Turn the On/Off switch to On. • The Power LED on the front panel will light up green as soon as the power adapter is connected properly and the switch is turned on. The Power LED will flash for a few seconds, then it will light up steady when the self-test is complete. If the LED flashes for one minute or longer, see “Appendix A: Troubleshooting.” 6.
ADSL Gateway with 4-Port Switch Chapter 5: Configuring the ADSL Gateway Overview Follow the steps in this chapter and use the Gateway’s web-based utility to configure the Gateway. This chapter will describe each web page in the Utility and each page’s key functions. The utility can be accessed via your web browser through use of a computer connected to the Gateway.
ADSL Gateway with 4-Port Switch Applications & Gaming • Single Port Forwarding. Use this screen to set up common services or applications on your network. • Port Range Forwarding. To set up public services or other specialized Internet applications on your network, click this tab. • Port Triggering. To set up triggered ranges and forwarded ranges for Internet applications, click this tab. • DMZ. To allow one local user to be exposed to the Internet for use of special-purpose services, use this screen.
ADSL Gateway with 4-Port Switch The Setup Tab Basic Setup The first screen that appears is the Basic Setup tab. This tab allows you to change the Gateway's general settings. Change these settings as described here and click the Save Settings button to save your changes or Cancel Changes to cancel your changes. Internet Setup • ADSL Settings. The Gateway supports five Encapsulations: RFC 1483 Bridged, RFC 1483 Routed, RFC 2516 PPPoE, RFC 2364 PPPoA, and Bridged Mode Only.
ADSL Gateway with 4-Port Switch RFC 1483 Bridged Dynamic IP IP Settings. Select Obtain an IP Address Automatically if your ISP says you are connecting through a dynamic IP address. Figure 5-3: Internet Setup - Dynamic IP static ip address: a fixed address assigned to a computer or device that is connected to a network Static IP If you are required to use a permanent IP address to connect to the Internet, then select Use the following IP Address. • IP Address.
ADSL Gateway with 4-Port Switch RFC 1483 Routed If you are required to use RFC 1483 Routed, then select RFC 1483 Routed. • IP Address. This is the Gateway’s IP address, when seen from the WAN, or the Internet. Your ISP will provide you with the IP Address you need to specify here. • Subnet Mask. This is the Gateway’s Subnet Mask. Your ISP will provide you with the Subnet Mask. • Default Gateway. Your ISP will provide you with the Default Gateway Address, which is the ISP server’s IP address. • Primary DNS.
ADSL Gateway with 4-Port Switch RFC 2364 PPPoA Some DSL-based ISPs use PPPoA (Point-to-Point Protocol over ATM) to establish Internet connections. If your ISP uses a PPPoA, enable PPPoA. • User Name and Password. Enter the User Name and Password provided by your ISP. • Connect on Demand: Max Idle Time. You can configure the Gateway to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time).
ADSL Gateway with 4-Port Switch Optional Settings (Required by some ISPs) domain: a specific name for a network of computers • Host Name and Domain Name. These fields allow you to supply a host and domain name for the Gateway. Some ISPs require these names as identification. You may have to check with your ISP to see if your broadband Internet service has been configured with a host and domain name. In most cases, leaving these fields blank will work. packet: a unit of data sent over a network • MTU.
ADSL Gateway with 4-Port Switch • Time Setting. This is where you set the time zone for your Gateway. When finished making your changes on this tab, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes. DDNS The Gateway offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you assign a fixed host and domain name to a dynamic Internet IP address.
ADSL Gateway with 4-Port Switch Advanced Routing The Advanced Routing screen allows you to configure the dynamic routing and static routing settings. Advanced Routing • Dynamic Routing. With Dynamic Routing you can enable the Gateway to automatically adjust to physical changes in the network’s layout. The Gateway, using the RIP protocol, determines the network packets’ route based on the fewest number of hops between the source and the destination.
ADSL Gateway with 4-Port Switch • Show Routing Table. Click the Show Routing Table button to open a screen displaying how data is routed through your LAN. For each route, the Destination IP address, Subnet Mask, Gateway, and Interface are displayed. Click the Refresh button to update the information. When finished making your changes on this tab, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes.
ADSL Gateway with 4-Port Switch The Security Tab Firewall When you click the Security tab, you will see the Firewall screen. This screen contains Filters and the option to Block WAN Requests. Filters block specific Internet data types and block anonymous Internet requests. • Firewall. To add Firewall Protection, click Enabled. If you do not want Firewall Protection, click Disabled. Additional Filters. Select the filter(s) you want to enable. • Filter Proxy.
ADSL Gateway with 4-Port Switch VPN Virtual Private Networking (VPN) is a security measure that basically creates a secure connection between two remote locations. The VPN screen allows you to configure your VPN settings to make your network more secure. VPN Passthrough • IPSec Passthrough. Internet Protocol Security (IPSec) is a suite of protocols used to implement secure exchange of packets at the IP layer. To allow IPSec Passthrough, click the Enabled button.
ADSL Gateway with 4-Port Switch type of encryption that is being used by the VPN device at the other end of the tunnel. Or, you may choose not to encrypt by selecting Disable. In the screen shown, DES (which is the default) has been selected. • Authentication. Authentication acts as another level of security. There are two types of authentication: MD5 and SHA (SHA being more secure).
ADSL Gateway with 4-Port Switch Advanced VPN Tunnel Setup From the Advanced IPSec VPN Tunnel Setup screen, you can adjust the settings for specific VPN tunnels. Phase 1 • Phase 1 is used to create a security association (SA), often called the IKE SA. After Phase 1 is completed, Phase 2 is used to create one or more IPSec SAs, which are then used to key IPSec sessions. • Operation Mode. There are two modes: Main and Aggressive, and they exchange the same IKE payloads in different sequences.
ADSL Gateway with 4-Port Switch • Key Life Time. In the Key Lifetime field, you may select to have the key expire at the end of a time period of your choosing. Enter the number of seconds you’d like the key to be used until a re-key negotiation between each endpoint is completed. Other Setting • NetBIOS broadcast. Check the box next to NetBIOS broadcast to enable NetBIOS traffic to pass through the VPN tunnel. • Anti-replay. Check the box next to Anti-replay to enable the Anti-replay protection.
ADSL Gateway with 4-Port Switch The Access Restrictions Tab Internet Access The Access Restrictions tab allows you to block or allow specific kinds of Internet usage. You can set up Internet access policies for specific computers and set up filters by using network port numbers. • Internet Access Policy. Multiple Filters can be saved as Internet Access Policies. When you wish to edit one, select the number of the Policy from the drop-down menu. The tab will change to reflect the settings of this Policy.
ADSL Gateway with 4-Port Switch 2. Click the Edit List button. This will open the List of computers screen. From this screen, you can enter the IP address or MAC address of any computer to which this policy will apply. You can even enter ranges of computers by IP address. Click the Apply button to save your settings, the Cancel button to undo any changes, and the Close button to return to the Filters tab. 3.
ADSL Gateway with 4-Port Switch The Applications and Gaming Tab Single Port Forwarding The Single Port Forwarding screen provides options for customization of port services for common applications. When users send this type of request to your network via the Internet, the Gateway will forward those requests to the appropriate computer.
ADSL Gateway with 4-Port Switch Port Range Forwarding The Port Forwarding screen sets up public services on your network, such as web servers, ftp servers, e-mail servers, or other specialized Internet applications. (Specialized Internet applications are any applications that use Internet access to perform functions such as videoconferencing or online gaming. Some Internet applications may not require any forwarding.
ADSL Gateway with 4-Port Switch DMZ The DMZ screen allows one local user to be exposed to the Internet for use of a special-purpose service such as Internet gaming and videoconferencing through DMZ Hosting. DMZ hosting forwards all the ports for one computer at the same time, which differs from Port Range Forwarding, which can only forward a maximum of 10 ranges of ports. • DMZ Hosting.
ADSL Gateway with 4-Port Switch The Administration Tab Management The Management screen allows you to change the Gateway’s access settings as well as configure the SNMP (Simple Network Management Protocol) and UPnP (Universal Plug and Play) features. Gateway Access Local Gateway Access. To ensure the Gateway’s security, you will be asked for your password when you access the Gateway’s Web-based Utility. The default username and password is admin. • Gateway Username. Enter the default admin.
ADSL Gateway with 4-Port Switch UPnP UPnP allows Windows XP to automatically configure the Gateway for various Internet applications, such as gaming and videoconferencing. UPnp. To enable UPnP, click Enabled. When finished making your changes on this tab, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes.
ADSL Gateway with 4-Port Switch Reporting The Reporting tab provides you with a log of all incoming and outgoing URLs or IP addresses for your Internet connection. It also provides logs for VPN and firewall events. Log Log. To enable log reporting, click Enabled. • Logviewer IP Address. Enter the IP Address to receive logs into the field. Email Alerts E-Mail Alerts. To enable E-Mail Alerts, click Enabled. • Denial of Service Thresholds. Enter the thresholds of events you want to receive.
ADSL Gateway with 4-Port Switch Diagnostics Ping Test Ping Test Parameters • Ping Target IP. Enter the IP Address that you want to ping in the field. This can be either a local (LAN) IP or an Internet (WAN) IP address. • Ping Size. Enter the size of the ping packets. • No. of Pings. Enter the number of times that you want to ping. • Ping Interval. Enter the ping interval in milliseconds. Figure 5-27: Adminstration tab - Diagnostics • Ping Timeout. Enter the time in milliseconds. • Ping Result.
ADSL Gateway with 4-Port Switch Firmware Upgrade To upgrade the Gateway’s firmware: 1. Click the Browse button to find the firmware upgrade file that you downloaded from the international Linksys website and then extracted. 2. Double-click the firmware file you downloaded and extracted. Click the Upgrade button, and follow the instructions there.
ADSL Gateway with 4-Port Switch The Status Tab Gateway This screen displays information about your Gateway and its WAN (Internet) Connections. Gateway Information Gateway Information displays the Software Version, MAC Address, and Current Time. Internet Connections The Internet Connections displayed are the ADSL Link, PPP Login, Internt IP Address, Public Subnet Mask, Default Gateway, and Primary DNS Server. System Statistics System Statistics displays the Packets Sent and Packets Received.
ADSL Gateway with 4-Port Switch Local Network The Local Network information that is displayed is the Local Mac Address, IP Address, Subnet Mask, and DHCP Server. To view the DHCP Clients Table, click the DHCP Clients button. DHCP Clients Table. Click the DHCP Clients Table button to show the current DHCP Client data. You will see the MAC address, computer name, and IP address of the network clients using the DHCP server. (This data is stored in temporary memory and changes periodically.
ADSL Gateway with 4-Port Switch Appendix A: Troubleshooting This appendix consists of two parts: “Common Problems and Solutions” and “Frequently Asked Questions.” Provided are possible solutions to problems that may occur during the installation and operation of the Gateway. Read the descriptions below to help you solve your problems. If you can’t find an answer here, check the Linksys website at www.linksys.com. Common Problems and Solutions 1. I need to set a static IP address on a computer.
ADSL Gateway with 4-Port Switch 7. Toward the bottom of the window, select Use the following DNS server addresses, and enter the Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its website to find the information. 8. Click the OK button in the Internet Protocol (TCP/IP) Properties window, and click the OK button in the Local Area Connection Properties window. 9. Restart the computer if asked.
ADSL Gateway with 4-Port Switch B. Open a command prompt. For Windows 98 and Me: • Click Start and Run. In the Open field, type in command. Press the Enter key or click the OK button. For Windows NT, 2000, and XP: • Click Start and Run. In the Open field, type cmd. Press the Enter key or click the OK button. In the command prompt, type ping 192.168.1.1 and press the Enter key. • If you get a reply, the computer is communicating with the Gateway.
ADSL Gateway with 4-Port Switch 4. I am not able to access the Setup page of the Gateway’s web-based utility. • Refer to “Problem #2, I want to test my Internet connection” to verify that your computer is properly connected to the Gateway. 1. Refer to “Appendix C: Finding the MAC Address and IP address for Your Ethernet Adapter” to verify that your computer has an IP Address, Subnet Mask, Gateway, and DNS. 2. Set a static IP address on your system; refer to “Problem #1: I need to set a static IP address.
ADSL Gateway with 4-Port Switch 6. I need to set up a server behind my Gateway and make it available to the public. To use a server like a web, ftp, or mail server, you need to know the respective port numbers they are using. For example, port 80 (HTTP) is used for web; port 21 (FTP) is used for FTP, and port 25 (SMTP outgoing) and port 110 (POP3 incoming) are used for the mail server. You can get more information by viewing the documentation provided with the server you installed.
ADSL Gateway with 4-Port Switch 5. Enter the IP address of the computer or network device that you want the port server to go to. For example, if the web server’s Ethernet Adapter IP address is 192.168.1.100, you would enter 100 in the field provided. Check “Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting an IP address. 6. Check the Enable option for the port services you want to use.
ADSL Gateway with 4-Port Switch 10. I am a PPPoE user, and I need to remove the proxy settings or the dial-up pop-up window. If you have proxy settings, you need to disable these on your computer. Because the Gateway is the gateway for the Internet connection, the computer does not need any proxy settings to gain access. Please follow these directions to verify that you do not have any proxy settings and that the browser you use is set to connect directly to the LAN. • For Microsoft Internet Explorer 5.
ADSL Gateway with 4-Port Switch Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 • Perform the upgrade using the TFTP program or the Gateway’s web-based utility through its Administration tab. 14. My DSL service’s PPPoE is always disconnecting. PPPoE is not actually a dedicated or always-on connection. The DSL ISP can disconnect the service after a period of inactivity, just like a normal phone dial-up connection to the Internet. • There is a setup option to “keep alive” the connection.
ADSL Gateway with 4-Port Switch 16. The Power LED flashes continuously. The Power LED lights up when the device is first powered up. In the meantime, the system will boot up itself and check for proper operation. After finishing the checking procedure, the LED remains steady to show that the system is working fine. If the LED continues to flash after this time, the device is not working properly. Try to flash the firmware by assigning a static IP address to the computer, and then upgrade the firmware.
ADSL Gateway with 4-Port Switch Does the LAN connection of the Gateway support 100Mbps Ethernet? The Gateway supports 100Mbps over the auto-sensing Fast Ethernet 10/100 switch on the LAN side of the Gateway. What is Network Address Translation and what is it used for? Network Address Translation (NAT) translates multiple IP addresses on the private LAN to one public address that is sent out to the Internet.
ADSL Gateway with 4-Port Switch The web page hangs; downloads are corrupt, or nothing but junk characters are being displayed on the screen. What do I need to do? Force your Ethernet Adapter to 10Mbps, and turn off the “Auto-negotiate” feature of your Ethernet Adapter as a temporary measure. (Please look at the Network Control Panel in your Ethernet Adapter’s Advanced Properties tab.) Make sure that your proxy setting is disabled in the browser. Check our website at www.linksys.
ADSL Gateway with 4-Port Switch Is the Gateway cross-platform compatible? Any platform that supports Ethernet and TCP/IP is compatible with the Gateway. How many ports can be simultaneously forwarded? Theoretically, the Gateway can establish 520 sessions at the same time, but you can only forward 10 ranges of ports. What are the advanced features of the Gateway? The Gateway’s advanced features include Filters, Port Forwarding, Routing, and DDNS.
ADSL Gateway with 4-Port Switch Appendix B: Configuring IPSec between a Windows 2000 or XP Computer and the Gateway Introduction This document demonstrates how to establish a secure IPSec tunnel using preshared keys to join a private network inside the Gateway and a Windows 2000 or XP computer. You can find detailed information on configuring the Windows 2000 server at the Microsoft website: NOTE: Keep a record of any changes you make.
ADSL Gateway with 4-Port Switch How to Establish a Secure IPSec Tunnel Step 1: Create an IPSec Policy 1. Click the Start button, select Run, and type secpol.msc in the Open field. The Local Security Setting screen will appear. Figure B-1: Local Security Screen 2. Right-click IP Security Policies on Local Computer (Win XP) or IP Security Policies on Local Machine (Win 2000), and click Create IP Security Policy. 3. Click the Next button, and then enter a name for your policy (for example, to_Router).
ADSL Gateway with 4-Port Switch 3. The Filters Properties screen will appear. Select the Addressing tab. In the Source address field, select My IP Address. In the Destination address field, select A specific IP Subnet, and fill in the IP Address: 192.168.1.0 and Subnet mask: 255.255.255.0. (These are the Router’s default settings. If you have changed these settings, enter your new values.) 4. If you want to enter a description for your filter, click the Description tab and enter the description there.
ADSL Gateway with 4-Port Switch 7. The IP Filter List screen should appear. Enter an appropriate name, such as Router->win for the filter list, and de-select the Use Add Wizard check box. Click the Add button. 8. The Filters Properties screen will appear. Select the Addressing tab. In the Source address field, select A specific IP Subnet, and enter the IP Address: 192.168.1.0 and Subnet mask: 255.255.255.0. (Enter your new values if you have changed the default settings.
ADSL Gateway with 4-Port Switch Step 3: Configure Individual Tunnel Rules Tunnel 1: win->Router 1. From the IP Filter List tab, click the filter list win->Router. 2. Click the Filter Action tab, and click the filter action Require Security radio button. Then, click the Edit button. Figure B-10: IP Filter List Tab 3. From the Security Methods tab, verify that the Negotiate security option is enabled, and deselect the Accept unsecured communication, but always respond using IPSec check box.
ADSL Gateway with 4-Port Switch 4. Select the Authentication Methods tab, and click the Edit button. 5. Change the authentication method to Use this string to protect the key exchange (preshared key) and enter the preshared key string, such as XYZ12345. Click the OK button. Figure B-13: Authentication Methods 6. This new Preshared key will be displayed. Click the Apply button to continue, if it appears on your screen, otherwise proceed to the next step.
ADSL Gateway with 4-Port Switch 7. Select the Tunnel Setting tab and click The tunnel endpoint is specified by this IP Address radio button. Then, enter the Router’s WAN IP Address. 8. Select the Connection Type tab and click All network connections. Then, click the OK or Close button to finish this rule. Figure B-16: Tunnel Setting Tab Tunnel 2: Router->win 9. In the new policy’s properties screen, make sure that “win -> Router” is selected and deselect the Use Add Wizard check box.
ADSL Gateway with 4-Port Switch 10. Go to the IP Filter List tab, and click the filter list Router->win. 11. Click the Filter Action tab, and select the filter action Require Security. Then, click the Edit button. From the Security Methods tab, verify that the Negotiate security option is enabled, and deselect the Accept unsecured communication, but always respond using IPSec check box. Select Session key Perfect Forward Secrecy, and click the OK button. Figure B-19: IP Filter List Tab 12.
ADSL Gateway with 4-Port Switch 13. Change the authentication method to Use this string to protect the key exchange (preshared key), and enter the preshared key string, such as XYZ12345. (This is a sample key string. Yours should be a key that is unique but easy to remember.) Then click the OK button. 14. This new Preshared key will be displayed. Click the Apply button to continue, if it appears on your screen, otherwise proceed to the next step. Figure B-22: Preshared Key 15.
ADSL Gateway with 4-Port Switch 16. Click the Connection Type tab, and select All network connections. Then click the OK or Close button to finish. 17. From the Rules tab, click the OK or Close button to return to the secpol screen. Figure B-25: Connection Type Step 4: Assign New IPSec Policy In the IP Security Policies on Local Computer window, right-click the policy named to_Router, and click Assign. A green arrow appears in the folder icon.
ADSL Gateway with 4-Port Switch Step 5: Create a Tunnel Through the Web-Based Utility 1. Open your web browser, and enter 192.168.1.1 in the Address field. Press the Enter key. 2. When the User name and Password field appears, enter the default user name and password admin. Press the Enter key. 3. From the Setup tab, click the VPN tab. 4. From the VPN tab, select the tunnel you wish to create in the Select Tunnel Entry drop-down box. Then click Enabled.
ADSL Gateway with 4-Port Switch AppendixC:FindingtheMACAddressandIPAddressforYour Ethernet Adapter This section describes how to find the MAC address for your computer’s Ethernet Adapter so you can use the MAC filtering feature of the Gateway. You can also find the IP address of your computer’s Ethernet Adapter. This IP address is used for the Gateway’s filtering, forwarding, and/or DMZ features. Follow the steps in this appendix to find the Adapter’s MAC or IP address in Windows 98, Me, 2000, or XP.
ADSL Gateway with 4-Port Switch Windows 2000 or XP Instructions 1. Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button. Note: The MAC address is also called the Physical Address. 2. At the command prompt, enter ipconfig /all. Then press the Enter key. 3. Write down the Physical Address as shown on your computer screen; it is the MAC address for your Ethernet Adapter. This appears as a series of numbers and letters.
ADSL Gateway with 4-Port Switch Appendix D: Upgrading Firmware The Gateway's firmware is upgraded through the Web-Utility's Firmware Upgrade tab from the Administration tab. Follow these instructions: 1. Click the Browse button to find the firmware upgrade file that you downloaded from the Linksys international website and then extracted. 2. Double-click the firmware file you downloaded and extracted. Click the Upgrade button, and follow the instructions there.
Wireless-G ADSL Gateway Appendix E: Windows Help Windows is the most used operating system in the world and comes with many features that help make networking easier. These features can be accessed through Windows Help and are described in this appendix. TCP/IP Before a computer can communicate within a network, TCP/IP must be enabled. TCP/IP is a set of instructions, or protocol, all computers follow to communicate over a network.
ADSL Gateway with 4-Port Switch Appendix F: Glossary Adapter - This is a device that adds network functionality to your computer. Bit - A binary digit. Boot - To start a device and cause it to start executing instructions. Bridge - A device that connects two different kinds of local networks, such as a wireless network to a wired Ethernet network. Broadband - An always-on, fast Internet connection.
ADSL Gateway with 4-Port Switch Dynamic IP Address - A temporary IP address assigned by a DHCP server. Encryption - Encoding data transmitted in a network. Ethernet - IEEE standard network protocol that specifies how data is placed on and retrieved from a common transmission medium. Firewall - A set of related programs located at a network gateway server that protects the resources of a network from users from other networks. Firmware - The programming code that runs a networking device.
ADSL Gateway with 4-Port Switch NAT (Network Address Translation) - NAT technology translates IP addresses of a local area network to a different IP address for the Internet. Network - A series of computers or devices connected for the purpose of data sharing, storage, and/or transmission between users. Node - A network junction or connection point, typically a computer or work station. Packet - A unit of data sent over a network.
ADSL Gateway with 4-Port Switch Switch - 1. A data switch that connects computing devices to host computers, allowing a large number of devices to share a limited number of ports. 2. A device for making, breaking, or changing the connections in an electrical circuit. TCP (Transmission Control Protocol) - A network protocol for transmitting data that requires acknowledgement from the recipient of data sent.
ADSL Gateway with 4-Port Switch Appendix G: Specifications Standards IEEE 802.3, IEEE 802.3u, G.992.1 (G.dmt), G.992.2 (G.lite), T1.413i2 Ports Power, LINE (ADSL), Ethernet (1-4) Buttons Reset, Power Switch Cabling Type CAT 5 UTP (Ethernet), Standard Telephone (ADSL) LEDs Power, Ethernet (1-4), DSL, Internet Security features Stateful Packet Inspection (SPI ) Firewall Dimensions 186 mm x 154 mm x 48 mm Unit Weight 0.
ADSL Gateway with 4-Port Switch Appendix H: Warranty Information LIMITED WARRANTY Linksys warrants to You that, for a period of three years (the “Warranty Period”), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys' entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates.
ADSL Gateway with 4-Port Switch Appendix I: Regulatory Information FCC Statement This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ADSL Gateway with 4-Port Switch Appendix J: Contact Information Need to contact Linksys? Visit us online for information on the latest products and updates to your existing products at: http://www.linksys.com/international If you experience problems with any Linksys product, you can e-mail us at: In Europe E-mail Address Austria support.at@linksys.com Belgium support.be@linksys.com Denmark support.dk@linksys.com France support.fr@linksys.com Germany support.de@linksys.com Italy support.