User Manual
Table Of Contents
- DL4 MkII Owner's Manual
- Welcome to DL4 MkII
- Quick Start
- Basic Operation
- Working with Presets
- Loading Presets A, B, and C
- Loading Presets D, E, and F
- Loading Presets 1 - 128 via MIDI
- Saving a Preset
- Restoring Factory Presets
- About Tap Tempo
- Configuring Delay and Reverb Routing
- Stereo vs. Mono Output
- Setting up an Expression Pedal and Footswitches
- Configuring One or More Parameters for Pedal Control
- Configuring Footswitch Control Options
- Controlling The Classic Looper Parameters
- Using a Microphone
- Using the Looper
- Effects Models
- Global Settings
- MIDI
- Additional Resources
40
‘
TILE
A Line 6 original.
Way back in the day, some recording studios went to the expense of building a tiled room for capturing natural sound reflections to add some liveliness
to the instruments. Now you can add a bright, reflective reverb effect with just the twist of the Selector knob.
TWEAK sets Predelay from 0 to 200 milliseconds.
DUCKING
A Line 6 original.
If you’ve ever wished that big reverb tail wold just get out of the way while you’re picking, this one is for you. Much like the "DUCKED" delay, this Ducking
reverb automatically adjusts its mix based on your input signal. While you’re playing, it politely stays quieter, and once it detects your playing level drops down, it ramps up its level
so the reverb decay is heard on the end of your phrase.
TWEAK sets Predelay from 0 to 200 milliseconds.
PLATEAUX
A Line 6 original.
Plate reverbs were mechanical units consisting essentially of a metal sheet (or “plate”) in a box that sound was played into, for which a transducer then
picked up and amplified its reflections. Due to the density of the metal plate, the resulting reverberations are very full sounding, with softer reflections and a smooth tail. As a bonus,
our Plateaux plate reverb adds two pitch-shifted overtones your signal with a bit of modulation to add color and atmosphere. The TWEAK knob offers several different modes for these
added pitch shifts. Here’s another tip—if you love the sound of the Plateaux reverb, but don’t want the added pitch shift embellishments, check out the "GANYMEDE" (it’s essentially
the same reverb without the pitch shifting).
TWEAK chooses the Pitch Mode, There are two pitches per Mode (pitches are listed in positive or negative, semi-tone intervals):
Mode 1 = -24 / -12
Mode 2 = -24 / +24
Mode 3 = -12 / +12
Mode 4 = +12 / +24
Mode 5 = -12 / -5
Mode 6 = -12 / +7
Mode 7 = -5 / +7
Mode 8 = +7 / +12
REVERB OFF
If you really just don’t care about all that effort we put into the nice reverb models, set the Selector knob to this option to bypass the reverb completely.
CAVE
A Line 6 original.
History tells us that nine out of ten audibly discriminating Neanderthals agreed that nothing was better at enhancing yells and percussive performances
than a large subterranean space. Now you can experience what the ancestors did by placing your DL4 MkII tones in the depths of a cavern, figuratively speaking.
TWEAK sets Predelay from 0 to 200 milliseconds.