Quick Start Manual

L2t / L2m Back paneL
10. Line Input – Connecttheline-leveloutputofyourmixertothecombi(XLRor1/4-inch)Lineinput.The1/4-inchinputcanacceptunbalanced
(Tip-Sleeve)orbalanced(Tip-Ring-Sleeve)cables.TheSignalLEDlightsgreenwhenasignalispresentandmayashrediftheinputisclipped.
11. L&R Aux Inputs – TheseL&RstereoRCAjacksareforconnectingtheaudiooutputofaDJmixer,MP3player,orCD/DVDplayer.Whenusinga
singleL2t/L2mspeaker,theleftandrightinputsaresummedtomono.IfasecondL2torL2misconnectedviaL6LINK,theleftandrightAuxInputs
will be automatically split between the two speakers.
12. Feedback Suppression – Turnsonthe12-bandfeedbacksuppressioncircuitfortheMixerInputchannel.PresstheOnbuttontoenableor
disableFeedbackSuppression;pressandholdtheOnbuttontoselectaggressive(red),medium(amber),ormild(green)FeedbackSuppression.
13. Loop Thru Output – ThisoutputduplicatesthesignalreceivedattheLineinputjack.
14. Mix Out Output – This output sends a mix of all three channels (Channel 1, Channel 2, and back panel inputs)
15. Master Level – Setstheoveralloutputlevel.TheLimitLEDlightsiftheMasterLimiterkicksin.
16. Speaker Mode – L2t/L2mcanbeoptimizedforvariousapplications.PresstheSpeakerModebuttontocyclebetweenReference/P.A.,Playback,
FloorMonitor,Keyboards,AcousticGuitar,orElectricGuitar.Seethetablebelowformoreinformation.
17. L6 LINK
TM
– Thisconnectionprovidesapowerful,proprietarydigitallinkbetweenvariousL6LINK-compatibleproducts,enablingeasy,reliable,
one-cableconnectivity.InthecaseofL2t/L2m,L6LINK-connectedspeakerscanbedaisy-chained,allowingallproductstosyncandcommunicate
uniquelywitheachother.WhentwoormoreL2torL2mspeakersareconnectedviaL6LINK,the7-segmentdisplayindicateswhethereachspeaker
isleft(“L”),right(“r”),orL+Rmono(“b”).WhenusedwithaStageScapemixer,the7-segmentdisplayidentieseachspeakerwithanumber.
18. Power Switch – Turns the speaker on and off.
Speaker Mode Description
Reference/P.A. Thisistherecommendedmodeforlivesoundreinforcement,withaatfrequencyresponse,a2.2kHzcrossoverfrequency,
and maximum low frequency extension.
Playback Optimizedforprerecordedmusic;similartoP.A.modewithanemphasisatextremelowandhighfrequencies.
FloorMonitor SimilartoP.A.modewithaslightreductioninlowfrequencycontenttocounteractcouplingwhenplacingthespeaker
ontheoor.Ifthespeakerispoweredonwhileinahorizontalposition,FloorMonitorspeakermodewillbeselected
automatically. The user can then change to a different mode, if desired.
Keyboards Flatfrequencyresponsewitha3.5kHzcrossoverfrequency;providesawarmerresponsethat’sbetterforinstruments,and
adds more relative energy from the cone.
AcousticGuitar 3.5kHzcrossoverfrequency,withatailoredlow-frequencyresponsetominimizeboominess.
ElectricGuitar Theoverallfrequencyresponseemulatesthesoundofa212comboamp.The10”speakerplaysfullrange,withthehorn
adding only the smallest amount of sparkle.