Owner's Manual

FX Models
7•5
Filter Models
Filter Models - Parameter Reference Table
Model Parameters
Voice Box Speed Start End Auto Mix
V-Tron Start End Speed Mode Mix
Q Filter Freq Q Gain Type Mix
Vocoder Mic Input -- Decay Mix
Seeker Speed Freq Q Steps Mix
Obi Wah Speed Freq Q Type Mix
Tron Up Freq Q Range Type Mix
Tron Down Freq Q Range Type Mix
Throbber Speed Freq Q Wave Mix
Slow Filter Freq Q Speed Mode Mix
Spin Cycle Speed Freq Q VolSens Mix
Comet Trails Speed Freq Q Gain Mix
Octisynth Speed Freq Q Depth Mix
Synth O Matic Freq Q Wave Pitch Mix
Attack Synth Freq Wave Speed Pitch Mix
Synth String Speed Freq Attack Pitch Mix
Growler Speed Freq Q Pitch Mix
Common Parameters
The following parameters are common to most Filter FX Models.
• Frequency: Selects the center frequency used by the effect.
• Q: Adjusts the frequency width of the filter in use.
• Speed: Adjusts the rate of the model’s modulation or oscillators, can be adjusted to
a Hz value or Note Division:
• Choosing a Hz value provides a specific modulation speed in cycles per second.
• Choosing a Note Division value provides a time that is based on the current Tap
Tempo (see “Tap Tempo” on page 1•5)