User Manual

Antenna Installation

How to Connect the Supplied Antenna

Connect the supplied detachable antennas to the Antenna A and B inputs located on the back panel of the receiver and twist clockwise

for ~1/2 turn as shown in figure 4.

NOTE: Antenna inputs ARE NOT DC biased

FIGURE 4

Preparing Rack Ears for Installation

Connect the supplied BNC connector to each rack ear prior to installing the rack ears to the chassis. Make

certain that the nut goes on the back side of the rack ear as shown in figure 5.

FIGURE 5

Rack Ear Installation

Only mount rack ears onto the chassis with supplied 1/4” hex screw and washers making certain to place a

washer on each side of the rack ear as shown in figure 6.

FIGURE 6