manual

USB 2.0 & eSATA HDD Docking Station

Introduction

Thank you for purchasing the LINDY USB 2.0 & eSATA HDD Docking

Station. Now you have the convenience and speed of connecting 2.5” or 3.5”

SATA hard drives to your USB or eSATA enabled computer without the need

for a complicated drive housing.

Features

• Supports all 2.5” and 3.5” SATA I/II hard drives

• High Speed eSATA 3Gbps and USB 2.0 480Mbps interfaces

• Hot Swapping for quick drive exchanges

• Plug and Play installation

• Eject button for safe removal of your hard drive

• Compatibility: Windows 2000/XP/Vista & Mac OS 10.3 or later

Installation

1. Connect the USB or eSATA cable to the matching

port on the back of the docking station and your

computer

2. Connect the power cable to the back of the docking

station and to the mains power supply

3. Firmly insert your SATA Hard Drive face down with

the connectors aligned to the SATA interface

4. Turn on the Docking Station using the power switch

5. No driver is required; allow your computer to detect

and install the Docking Station

6. Once your computer has finished installing the

Docking station it is ready to use

Disk Ejection

1. Ensure that the Power and Activity light is not

flickering and that no data transfer is in place

2. Firmly press down on the Eject button

3. The Hard Drive will be ejected from the SATA

connection and may now be removed.

Hardware

1. SATA Interface

2. Eject Button

3. 2.5” Drive Slot

4. 3.5” Drive Slot

5. Power & Activity LED

Package Contents

• USB 2.0 & eSATA HDD Docking Station

• eSATA Cable

• USB Cable

• Power Supply

• This manual

PAGE 1
USB 2.0 & eSATA HDD Docking Station Hardware Introduction Thank you for purchasing the LINDY USB 2.0 & eSATA HDD Docking Station. Now you have the convenience and speed of connecting 2.5” or 3.5” SATA hard drives to your USB or eSATA enabled computer without the need for a complicated drive housing. 1. 2. 3. 4. 5. SATA Interface Eject Button 2.5” Drive Slot 3.5” Drive Slot Power & Activity LED Installation Features • • • • • • Supports all 2.5” and 3.
PAGE 2
CE Certification This equipment complies with the requirements relating to electromagnetic compatibility, EN 55024 and EN55022 class A for ITE, EN61000-3-2/-3 the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility.