User's Guide

!
6. SSC Command Reference
Parameter
7.7. reboot
Description
reboot command is used to reboot the board.
Example
reboot
7.8. ram
ram command is used to query the size of the remaining heap in the system.
Example
ram
Table 6-6. ip Command Parameter
Parameter Description
-Q Show IP address.
-o mode
•
mode = 1 : IP address of interface STA.
•
mode = 2 : IP address of interface AP.
•
mode = 3 : both
-S Set IP address.
-i ip IP address.
-m mask Subnet address mask.
-g gateway Default gateway.
Xinyuan
! /1212
2021.12