User's Manual

Lilee Systems™ TransAir™ PTC-3000 Family User Manual
Page 21
4.1.6 M12 to DB9 Serial Device Cable (PTC-3201~4, PTC-3004, and PTC-3006)
Step 1: Locate the M12 serial connector. The location of the M12 serial port connector is
shown above in Figure 2.
Step 2: Insert the M12 to DB-9 cable. Insert the M12 end of the cable into the M12 serial
connector of the PTC-3000.
Step 3: Secure the M12 connector. Turn the locking cover of the M12 connector end of the
cable clockwise to secure the cable to the connector on the PTC-3000.
Step 4: Insert the serial connector. Insert the DB-9 connector of a serial device into the DB-9
connector on the cable.
Step 5: Secure the connector. Secure the serial device connector to the external interface by
tightening the two retention screws on either side of the connector.
4.1.7 TNC to SMA Male Connector for Wi-Fi Antennas with SMA Connectors
Step 1: Locate the TNC Wi-Fi connector. The location of the TNC Wi-Fi antenna connector is
shown above in Figure 1 and Figure 2.
Step 2: Insert the TNC to SMA connector (with center pin). Insert the TNC end of the
connector into the TNC connector of the PTC-3000.
Step 3: Secure the TNC to SMA connector. Turn the locking cover of the TNC connector end
of the TNC to SMA connector clockwise to secure connector on the PTC-3000.
Step 4: Connect a Wi-Fi antenna. Insert the SMA connector end of a Wi-Fi antenna to the
SMA connector end of the TNC to SMA connector.
4.1.8 TNC to SMA Female Connector for GPS or 3G
Step 1: Locate the TNC connector for GPS, 3G. The location of the TNC connectors is shown
above in Figure 1 and Figure 2.
Step 2: Insert the TNC to SMA connector (without center pin). Insert the TNC end of the
connector into the TNC connector of the PTC-3000.
Step 3: Secure the TNC to SMA connector. Turn the locking cover of the TNC connector end
of the TNC to SMA connector clockwise to secure connector on the PTC-3000.
Step 4: Connect to a GPS or 3G antenna. Insert the SMA connector end of a GPS or 3G
antenna (or antenna cable) to the SMA connector end of the TNC to SMA connector.