lighted LED ILLUMINATED ALUMINUM CABINETS IMPRESSIONS Installation Instructions LED Designer Mirrors by LTL home Products Spirit ELECTRICAL SAFETY INSTRUCTIONS All connections must be installed by a licensed electrician, in accordance with current building codes. Consult a qualified electrician. IMPORTANT Always switch off the electrical supply at the main during installation and maintenance. It is recommended that the circuit breaker is switched off for the necessary circuit before installation commences.
LL@ hta d LED ILLUMINATED ALUMINUM CABINETS IMPRESSIONS installation Instructions LED Designer Mirrors by LTL home Products Spiritless Assembly instruction for recess installation & .Fitting the glass shelves. . Firstly insert a shelf into the top two shelf support brackets then slide upwards so the grub screws on the under L side of the support brackets {Craw €} con be sufficiently tightened to hold glass in ' place. Repeat for the bottom . shelf (NOTE: be careful not jo overflight.
ng hte d LED ILLUMINATED ALUMINUM CABINETS IMPRESSIONS Installation Instructions LED Designer Mirrors by LTL home Products Spirit Assembly instruction for wall mount installation 1. Meuasure the length,widih,depth of back of cabinet for wall mount 2.Fixing the screw after the top slide able brackets moved to proper position. { see diagram D | 3. Fixing the screws of supporting bracket under the bottom of cabinet offer cabinet fixed on proper position. { See Diagram E § 4.
Installation Instructions LED Designer Mirrors by LTL home Products Espalier Installation Instructions: el LO®, 110V AC Mains Supply The next step is to make the electrical connection from the mirror to the mains supply. Use the connection wire fount] at the rear %f e mirror to rake the] necessary connections. A second person will need to hold the mirror in place whilst electrical connections are made.