Owner's Manual
Table Of Contents
- Quick Start Guide
- Installation and Operation Guide
- Product Overview
- Package Contents
- SKYPLAY-DFS-S Features and Connections
- SKYPLAY-DFS-R Features and Connections
- IR Remote
- Installation Instructions
- Frequently Asked Questions
- Troubleshooting
- SKYPLAY-DFS Technical Specifications
- SKYPLAY-DFS-EU Technical Specifications
- Spec Sheet
SKYPLAY-DFS Installaon Guide
13
10. The display will show the progress of the pairing status with the
SKYPLAY-DFS-S.
11. Once pairing is complete, a brief message will show the
SKYPLAY-DFS-S is paired with the SKYPLAY-DFS-R before starting to
transmit video.
Adding INX000461
Connected to INX000461
9. Once an active SKYPLAY-DFS-S is found, press OK on the remote to
start the pairing process.
Adding INX000461
Press OK to continue or Exit to cancel
If the SKYPLAY-DFS-S was too far away or the Register button was not
pressed and held within 60 seconds, a “source not found” message
will appear on the display. Please repeat the pairing process.
No WHDI source was found
Note: