Owner's Manual

SKYPLAY-DFS Installaon Guide
2
Important Safety Instrucons
Read all of these instrucons. Save them for future reference.
» Follow all warnings and instrucons marked on the device.
» This product is for indoor use only.
» Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result.
» Do not use the device near water.
» Do not place the device near, or over, radiators or heat registers.
» The device cabinet is provided with slots and openings to allow for adequate venlaon. To ensure reliable operaon, and to protect
against overheang, these openings must never be blocked or covered.
» The device should never be placed on a so surface (bed, sofa, rug, etc.) as this will block its venlaon openings. Likewise, the device
should not be placed in a built in enclosure unless adequate venlaon has been provided.
» Never spill liquid of any kind on the device.
» Unplug the device from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Clean only with a dry cloth.
» The device should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power
available, consult your dealer or local power company.
» To prevent damage to your installaon it is important that all devices are properly grounded.
» Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that
produce heat.
» Use only accessories specied or recommended by Intelix.
» Explanaon of graphical symbols:
◊ Lightning bolt/ash symbol: the lightning bolt/ash and arrowhead within an equilateral triangle symbol is intended
to alert the user to the presence of uninsulated “dangerous voltage” within the product enclosure which may be of
sucient magnitude to constute a risk of shock to a person or persons.
◊ Exclamaon point symbol: the exclamaon point within an equilateral triangle symbol is intended to alert the user
to the presence of important operang and maintenance (servicing) instrucons in the literature accompanying the
product.
» Do not allow anything to rest on the power cord or cables. Route the power cord and cables so that they cannot be stepped on or
tripped over. If an extension cord is used with this device make sure that the total of the ampere rangs of all products used on this
cord does not exceed the extension cord ampere rang. Make sure that the total of all products plugged into the wall outlet does not
exceed 15 amperes.
» To help protect your system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line
condioner, or uninterrupble power supply (UPS).
» Never push objects of any kind into or through cabinet slots. They may touch dangerous voltage points or short out parts resulng in a
risk of re or electrical shock.
» Do not aempt to service the device yourself. Refer all servicing to qualied service personnel.
» If the following condions occur, unplug the device from the wall outlet and bring it to qualied service personnel for repair.
◊ The power cord or plug has become damaged or frayed.
◊ Liquid has been spilled into the device.
◊ The device has been exposed to rain or water.
◊ The device has been dropped, or the cabinet has been damaged.
◊ The device exhibits a disnct change in performance, indicang a need for service.
◊ The device does not operate normally when the operang instrucons are followed.
» Only adjust those controls that are covered in the operang instrucons. Improper adjustment of other controls may result in
damage that will require extensive work by a qualied technician to repair.
» Use only with the cart, stand, table, or rack specied by Intelix or sold with the equipment. When/if a cart is used, use
cauon when moving the cart/equipment combinaon to avoid injury from p-over.
» Unplug this apparatus during lightning storms or when unused for long periods of me.