User Guide

20
MultiSITE CRC 1 Controller
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
CONFIGURATION SCREENS
Building Manager Screens
There are two main configuration screens as shown below. Press the left and right arrow buttons to move
between these two screens. Press a button on a screen to display the parameter selections for that item.
1/2 Building Manager
Display / Date & Time
Customize Home View
Filter Functions
Setpoint Config.
1
Code Search
Code Search
Use the Up and Down arrows
to choose an available
Function Code and select the
Code Search button to navi-
gate to the screen where that
function code resides.
Codes can be found in
brackets next to a parameter
throughout all menus. This
function is used for quicker
menu navigation.
Display Basic Settings – Date / Time,
Display Color, Standby Brightness (and
delay timing), Night Backlight level, Standby
Screen).
Filter Functions – Clear Filter Alarm,
Remaining Time, Lower/Raise Grill, Robot
Cleaning
Customize Home View
Hide On/Off, Mode, Schedule,
More, Set Temp, Space Temp,
Fan and Humidity options on
home screen.
Setpoint Cong.
Choose between Single/Dual set point(s)
and congure set point max/min limits and
deadband.
Note: Available functions/features may differ
based on the connected system.
2/2 Building Manager
Outdoor Unit Control
Override Setup
Setback Setup
Override Setup
If controller is in the unoccu-
pied mode then the controller
enters Override mode as soon
as the user taps the screen the
rst time.
Select this control to congure
settings for Override, including
set points, system mode, fan
speed and duration of override.
Outdoor Unit Control
Manage outdoor unit functions
through the Controller’s
interface.
Setback Setup
Setback settings are congurable
with this control including set
points, system mode and fan
speed.