Operation Manual

8
SAFETY INSTRUCTIONS
CAUTION

Contact your seller or the Service
Center once a year to clean the inter-
nal parts of the projector.
- If you do not clean the contaminat-
ed interior of the projector for a long
time, there may be a fire or damage
to the projector.

When cleaning plastic parts such as
the projector case, unplug the power
first and wipe with a soft cloth. Do
not spray with water or wipe with a
wet cloth. When cleaning the plastic
parts, such as the projector case,
do not use cleanser, automobile or
industrial shiner, abrasive or wax, ben-
zene, alcohol, etc., which can damage
the product.
- This can cause fire, electric shock or
product damage (deformation, cor-
rosion and damage).
OTHERS
WARNING

Only a qualified technician can disas-
semble or modify the projector. For
inspection, adjustment, or repair, con-
tact your seller or the Service Center.
- Otherwise, this may cause a fire or
an electric shock.

Dispose of the used battery properly.
- Otherwise, this may result in
explosion or fire.

The correct method of disposal may
vary depending on your country
or region. Dispose of the battery
pack according to the appropriate
instructions.

Do not throw or disassemble the
battery.
- Otherwise, this may result in fire or
explosion due to damage to the
battery.

Always use batteries approved and
certified by LG Electronics.
- Otherwise, this may result in fire or
explosion.

Store the battery away from metallic
objects, such as keys and paper clips.

Excess current may cause a rapid
increase in temperature, resulting in
fire or burns.

Do not store the battery near any
heat source, such as a heater.
- This may result in fire or damage
the product.

Do not store it at temperatures higher
than 60 °C or in high humidity.