Operation Manual

45
CUSTOMIZING SETTINGS
Setting Description
Picture
Reset
Restores the options of each mode to the factory default.
Aspect
Ratio
Changed the image size to view images at its optimal size. (see page20)(see page20)
Picture
Wizard II
By following the instructions, using the remote control, you can eas-
ily adjust the picture quality to technical standards without needing an
expensive pattern device or a picture quality expert.
Screen
(RGB-PC)
Adjusts the picture quality of RGB-PC input.
Option
Resolution Available resolutions are 768 resolution (1024 x 768/ 1280
x 768/ 1360 x 768, 60 Hz) and 1050 resolution (1400 x
1050/ 1680 x 1050, 60 Hz).
Auto
Config.
Provides optimized picture quality by automatically calibrat-
ing the mismatch of horizontal width and picture shake
caused by clashes between the internal settings of the pro-
jector and various PC graphic signals.

You can also use the AUTO button on the remote control.
Position Moves the image up/down/left/right.
Size Changes the screen size.
Phase Makes the picture look clear by removing horizontal noise.
Reset Restores all the settings to the factory default.
Advanced Control
Setting Description
Dynamic Con-
trast
Adjusts the contrast to keep it at the best level according to the
brightness of the screen.
Dynamic Color Adjusts screen colors so that they look natural.
Clear White Makes the white area of screen look brighter and whiter.
Skin Color Detects the skin area of image and adjusts it to render a natural skin
color.
Noise Reduc-
tion
Reduces image noise.
Digital Noise
Reduction
This option reduces the noise produced while creating digital video
signals.
GAMMA Sets a gradation curve between video input and output signal.
Black Level Compensates the brightness and contrast of a screen to balance
with the black level of the video input.
Not available for RGB-PC.